Examples of using Minimum thickness in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
Minimum thickness: 4 in mm.
The cedar wood should have a minimum thickness of 1.5 mm.
The minimum thickness- 10 mm.
As for extended nails,they can be no more than 5 mm and a minimum thickness.
Set the minimum thickness of the filling.
F= 1 may betaken for the frame spacing when calculating the minimum thickness of the side plates.
The minimum thickness of metal sheets is 0.5 mm.
Recall that technologically the minimum thickness of the floor is 3.5 mm.
Minimum thickness is 2 µm and the maximum is 200 µm.
Most often, this material has a minimum thickness of 2 cm and a width greater than 10 cm.
Minimum thickness is 2 µm and the maximum is 200 µm.
MIL-T-27730A is a U.S. military specification(MIL-SPEC) that specifies a minimum thickness of 3 mils.
Minimum thickness Single, double boardFour-layer Board0.2mm.
The position of the marking on thehub allows the installer to immediately read the Minimum Thickness required for the replacement.
In this case, the minimum thickness of the cushion should be 10 cm.
The position of the marking on thehub allows the installer to immediately read the Minimum Thickness required for the replacement.
In other words, the minimum thickness of the screed must be 30 millimeters in any point of the surface.
The system is rack and pinion type of tube andplateParticleboard fit between strips having a minimum thickness of 28 mm(thickness could be more).
We will show that the minimum thickness is up to 2 mm, the maximum thickness is up to 5 mm.
Designed for arrangement of housing andpublic buildings with low permeability floor features a minimum thickness of the working layer, elasticity, softness, light weight.
The minimum thickness of pressurised parts shall be calculated having regard to the intensity of the stresses and to the following provisions.
For acceptance, the intervention agency may specify a minimum thickness of polythene lining as well as a particular quality of jute bag.
When it has a minimum thickness sufficient elasticity and gas permeability, which allows free movement of the film and prevents the inhibition of cell respiration.
This is followed by castingprocess wherein it should be noted that the minimum thickness of the concrete slab must not be less than 30 cm.
Cold rolled minimum thickness is 0.1- 8.0MM or less and most plants the thickness of the cold rolled steel sheet is the 4.5MM below; least thickness, the width is based on the device capability of the various factories and market demand decision.
Important: The level marked on thewall should not be less than the minimum thickness of the coating, the stated manufacturer of self-leveling mixture.
Let's add that the cellular concrete fully meets the requirements and standards required for the construction of walls and partitions,providing a minimum thickness of the masonry seam.
Such a device will allow you to get the minimum thickness of the cut, which means that waste is minimized, and the profitability of the sawmill will increase.
And today, when building a traditional house in Norway,only the carriage is used, the minimum thickness of logs is 28 cm in diameter, the maximum is about 50 cm.
All that is required is to know the length and width of a premise, its height, in the corners,as well as the minimum thickness of a layer of fill, then our program will calculate for you the amount of material to fill a given differential heights.