Examples of using Zero position in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
The rooms could realign to zero position.
It is not at the zero position after being unloading.
be switched on if the HV output knob is not at zero position.
If the zero position tracking set is too little.
Reset function: Operate simultaneously 2 motors to reach zero position.
The zero position is thus found extremely quickly and safely.
To lock the chair in the zero position or at a seat tilt of -6°.
Integrated signal conditioning Analogue voltage output signal with zero position 5 V.
With an internal limit stop Zero position can be read from outside.
Press button"A" to set the chronograph second hand to the zero position.
How to calibrate and adjust zero position, displacement and force on DMA.
The zero position of the Transposition track corresponds to the original key signature of the project.
(6) Return the voltage regulator to the zero position and press the"Stop" button.
Absolute position detection allows reliable measurements without mechanical zero position runs.
It also eliminates mechanical zero position runs when the system has been switched on.
Reset function: Operate simultaneously 2 motors to reach zero position Battery charger.
The setting to the so called zero position is another important factor for a decent grooming result.
the save is overwritten by the zero position of the player.
Calibrate ZERO position by adjusting the zero potentiometer until a 4 mA output signal is read at terminal+VE and-VE.
and set the center of the tool to a zero position of X= 0, Y= 0.
armrests can be locked in the zero position, additional locking points at 15° and 30°.
its position is recognized as zero position.
In order to avoid the time-consuming screwing of the cutter or drill in a zero position of a crosshair, this function has been programmed.
and the angles are automatically calculated in relation to the zero position selected.
drill in a zero position of a crosshair, this function has been programmed.
mechanical offset between the north pole of the rotor and the zero position of the position encoder.
you don't have to close your shower door to the zero position by hand every time after you paid for them.
crossing with negative slope of the voltage u1 and the zero position of the position encoder.