Examples of using The encoder in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Test the encoder Omron.
Color each point in the original manifold by its parameterization under the encoder.
Specifies the encoder method used.
The encoder PSENenco is used to determine position and speed.
For connecting the driver and the encoder of the moving part.
People also translate
If the encoder has several IP addresses, it will need one license per IP address.
Machine feature: PLC NC frequency electrical boxes,touch screen's display, the encoder counting.
Simply turn the encoder on, and it will do the rest.
Like any quadrature encoder, four unique logic states are created internally to the encoder.
Of course, the encoder can also choose to embed a new or additional identifiers as well.
If all other programs are closed and your CPU is still averaging upwards of 75%, try restarting the encoder software.
The encoder can emulate the procedures of a decoder for this P Frame reconstruction.
The encoder can only output 4 hashcode remove streams when do compare for hide watermark.
If the encoder is broken, you can also buy it in the local, it's convenient.
And we offer enough matching couplings to make the machine will never shut off due to the encoder problem.
Or, the encoder can signal to the decoder to perform multi-channel post-processing for another purpose.
This reduces complexity for the rest of the encoder, but at the cost of lost channel separation.
The encoder is an absolute no contact photoelectric unit that is directly connected to a cutter or plate cylinder drive shaft.
If LDPC decoding is used in the decoder 260, the receiving signal processing unit 100 may not use the encoder deparser.
Such symmetry would be expected because the decoder 12 isunpacking the audio information which was compressed by the encoder 10.
At 1420, the encoder generates an irregular sampling, or distribution, of motion vectors associated with the target image.
The encoder chooses between XOR and XNOR by determining which will result in the fewest transitions;the ninth bit encodes which operation was used.
Pulse count can be used to provide feedback, the position of the encoder machine accurate position, correct transmission error of the process.
If you wish to modify the encoder settings of a video title, click the Encoder button on the Video tab and make the required settings.
If serious deviations are detected,a signal is sent to the operator, who can communicate with the encoder using the analysis software.