Examples of using The encoder in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Tell me if you find the encoder.
The encoder operates also with no cable connected.
Filthy habit. I have got the encoder.
How to solve the encoder freezes prombles?
The encoder can be input with HDMI, RCA and SDI.
People also translate
Fourth, let's add the encoder first.
First we transfer the video from a video source to the encoder.
We enter, find the encoder and exit.
You can dismantle that transmitter by removing the encoder chip.
We enter, find the encoder and exit.
The encoder and decoder in Fmuser's DSTL system have a management IP address.
Launch system and the encoder information.
Press the OK button again to confirm and save,then restart the encoder.
Segment LED surrounding the encoder to indicate the rotating position.
The encoder and decoder in Fmuser's DSTL system have a PC-side management software.
This is the process of changing the input interface and setting up the encoder.
According to read out the encoder can be divided into contact and non-contact two;
Finally click"Save Config" to save the settings and restart the encoder.
Solution: Set the encoder output FPS the same as the DVD FPS or smaller than the DVD FPS.
The encoder suits 1U rack and can be configured by front panel LCD and NMS network management software.
When this icon becomes the connection of two computers,it means that the encoder can already be managed.
Also the encoder works with online live broadcast platform, such as YouTube, Ustream, Twitter, Facebook, etc.
Also the Encoder works with online live broadcast platform, such as YouTube, Facebook, Ustream, Twitter, etc.
Frequency Response: 5- 20 kHz±1 dB(Frequency Response may differ depending on the encoder software/bit rate).
Second, open the encoder and decoder PC management software DvbManager,the account is" admin" the password is also"admin.
Sudo apt-get update sudo apt-get install kodi You may also install the encoder and addons via command.
When the encoder is turned on, we can press the down button(▼) of the encoder, then we can see the management IP address of the encoder in the LCD display.
Frequency Response: 5Hz- 20 kHz(±1 dB)*Frequency response may differ depending on the encoder software or bit rate.