Examples of using Minimum load in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
Minimum load current 150 mA about 35 W.
In using such drills should provide a minimum load.
Minimum load on rotary tiller and machinery.
If you are using drills of this type,take care of minimum load.
Minimum load at rated input voltage.
Long life by doubling the service life and minimum load of the filter.
Minimum load current 150 mA about 35 W.
Single-phase devices provide a minimum load on the hands of the worker.
K ohms minimum load and 2000pF maximum capacitance.
Safety system exceeds standard minimum load requirements.
K ohms minimum load and 1000 pF maximum capacitance.
The preamplifier voltage gain is 10 dB(approximately 3 x), and the minimum load impedance is 5 kΩ.
The minimum load weight for one customer is 10 kg.
The self-locking device(working with a minimum load of 25 kg) allows a safe use of the winch.
The minimum load current of Section 1 150 mA about 35 W.
This regulator needs to have a minimum load of 100mA(out of 500mA) at any given time.
Since any type of soil can absorb and store moisture, ground dampness must always be regarded as the minimum load scenario.
Item-no.: KO ET 0-70 Electronic transformer without minimum load 0- 70 W in stock, delivery time: 1-2 business days.
High-quality creatine monohydrate with a high degree of micronization much easier supplementation and a minimum load during use.
The maximum allowable live load and the required minimum load bearing capacity of the fixings and the hangers for each individual ceiling system can be found in the installation diagrams.
Output impedance 400 ohms Balanced; 200 ohms SE Main,10K ohms minimum load and 5000pF maximum capacitance.
Output Impedance: 500 ohms Balanced, 250 ohms SE Main(2),20K ohms minimum load and 2000pF maximum capacitance.
Selection of the substrate depends on many factors- from the humidity of the room, where there will be a laminate floor,the load on the floor(the minimum load on the floor in the bedroom, the maximum- in the corridor), finally on your financial capabilities.
Minimum Totalised Load Σmin.
Each lashing point shall be designed andinstalled to provide a minimum rated load of 500 daN applied in any direction.
Ω Minimum recommended load impedance.
The lack of even the minimum physical load useful to the body.
The minimum continuous load current of Section 1 150 mA about 35 W.