Examples of using Frictional in English and their translations into Russian
{-}
-
Official
-
Colloquial
Good frictional resistance.
This results in high frictional forces.
Reduces frictional energy and heat build-up.
Reduction of torque and frictional force.
Frictional stability over a very wide temperature range.
Consistent and low frictional coefficient.
The necessary comminution effects are generated by pressure and frictional forces.
Testing the dynamic frictional properties.
This project was produced by the makers of the original game, Frictional Games.
In this state, no frictional wear occurs at all.
Its material must have high wear-resistance and low frictional coefficient.
Due to their low frictional torque, they are suitable for high speeds.
No, can't we have a little frictional orgasm?
You have to eschew frictional orgasm for a higher form of ecstasy.
Before the test, the chassis dynamometer shall be appropriately warmed up to the stabilized frictional force Ff.
Methods to measure the wetted frictional properties of the surface.
Peak frictional coefficient of test surface, requirement 0,9- how to define?
PTFE tower coating for excellent frictional properties and chemical inertness.
Its low frictional properties and right hand spiral flute enable smooth upward chip flow.
The Comparison test with dynamic frictional properties of the original part;
Since frictional force is essential for the device's operation, the groove must not be lubricated.
The front suspension was parallelogram with frictional damper, while the rear suspension was unsprung.
The wetted frictional properties of the surface shall be measured with either method(a) or(b) in section 3.2.
The quality of the seal depends on the amount of frictional force between the dynamic gasket and the pump shaft.
Special coating is excellent at elevated temperature oxidation resistance and low frictional coefficient.
Steel rolls provide increased frictional factor during contact with rolled material.
Frictional covers in a variety of sizes and material characteristics offer a wide range of performance features for your custom design.
Higher surface hardness and reduced frictional coefficient, even with porous and challenging surfaces.
Clearly it is not reasonable for a military commander to take account of factors over which he has no control such as the"frictional" factors in accuracy caused by enemy action.
Electrical power and frictional ignition sources associated with continuous miners.