Examples of using Pushbutton in English and their translations into Russian
{-}
-
Official
-
Colloquial
Fastener: double pushbutton.
Pushbutton IP55 10A 250V grey.
Countertop Operation Mode: Pushbutton.
Pushbutton with bell symbol white Prima.
Simple setting either via teach-in pushbutton, cable or IO-Link.
Pushbutton with bell symbol IP44 white Cedar Plus.
This number can be reset by briefly pressing pushbutton 4.
Release the pushbutton once the light flashes. 7.
If held down; the characters scroll until the pushbutton is released.
Pushbutton with locator light and bell symbol white Prima.
Emergency shut-down system by means of pushbutton and trip wire leg-operated.
Pushbutton pendant control box with emergency stop(48V).
Handle in cockpit on starboard side and emergency pushbutton on emergency panel.
Press the pushbutton to activate the card feed rollers.
Built-in version for machine control panels with self-monitoring contacts between pushbutton and switching element.
Pushbutton type P maintained PC self-return from right.
Automatic cycle by bimanual pushbutton, cycle selector cut of a head or both.
Pushbutton type PL maintained PCL self-return from right.
To set the adjustment height, keep the adjustment pushbutton that is located to the rear of the backrest pressed in Fig.
The pushbutton fixing on the handles and address tags are made of leather.
For example, if a developer is implementing a button that is clickable,the developer would select Pushbutton as the Role to implement.
Use the pushbutton switches on the front to select the speed.
The sequence of functions initiated by a command issued via a remote control, pushbutton, etc. depends on how the control's electronic system has been set.
Press the pushbutton for four to five seconds until it goes out.
Atight enclosure resistant to weather conditions facilitates outdoor installation of the reader andthe additional bell pushbutton may be used to implement the call function.
The 4-function pushbutton protects the operator against unintentional tilting of the platform under load.
Additional Information 5-axis simultaneous machining center, NC rotary indexing table, C-axis 360, B-axis 0 to -161, IKZ 40 bar with belt filter, chip conveyor,desktop pushbutton, handwheel, 3D measuring probe, counter readings.
If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi connection is made automatically.
To move directly to the next sequence,press the P2 pushbutton which will reset the chronograph and start it immediately for a new measurement.
If programme pushbutton 2 and reset pushbutton 4(for five seconds) are pushed at the same time, the remaining time to the next timed reverse rinsing cycle is indicated on 3 and display 5 will indicate the corresponding time interval between reverse rinsing cycles 0= minutes, 1 hours and 2 days.