Examples of using Variable resistor in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Variable resistor up to 220 kOhm;
Potentiometers Variable Resistors.
Variable resistor and its application area.
Potentiometers, Variable Resistors.
Variable resistors are called potentiometer.
Potentiometers, Variable Resistors.
A variable resistor is called a potentiometer.
Did Mr. Kearns invent the variable resistor?
Variable resistor SP-1 resistance up to 47 kOhm.
A variable resistor is a resistor which can have its resistance changed.
As for the control, it uses a variable resistor.
A variable resistor is a resistor which can have its resistance changed.
Exact regulation of the pulse duration is a variable resistor.
Potentiometer- three-terminal variable resistor(variable voltage divider).
The magnitude of the voltage received at the load, change the need for a variable resistor R5.
In this method, a variable resistor is attached in series with the armature.
This value should befixed with a red mark indicating the position of the variable resistor knob.
In the case, first, you should fix the variable resistor, and bring its threaded part out through the drilled hole.
Yes. As you can see,Dr. Kearns's basic unit consists of a capacitor a variable resistor and a transistor.
Potentiometers Variable Resistors Joystick Potentiometers Electronic Distributor from Professional Electronics Companies.
The power dissipated on the heater changes when the slider of the variable resistor R1 rotates from 100% to 0.
The memristor is essentially a two-terminal variable resistor, with resistance dependent upon the amount of charge q that has passed between the terminals.
A hole with a diameter of 10mm is drilled on the wall of the case, in which the variable resistor with its threaded leg is fixed.
Through a variable resistor and a filter of two resistances and a capacitor falls on the control output of the thyristor, which opens and passes the maximum current value through a light bulb or a soldering iron;
With a heavy-duty aluminium body,rubberised non-slip surface and a variable resistor, the FC600 promises smooth, reliable operation.
If the transistor is pulsed on and off fast enough, power to the light bulb may be varied as smoothly as ifcontrolled by a variable resistor.
Such an elementary circuit is assembled at the output ends of the variable resistor R1 and is combined with four soldering points.
The regulating element in the device used is a bipolar transistor VT1(its power is calculated from the demand of the load),functioning as a variable resistor, it is included in the circuit in series with the load.
The fraction of the positive half-cycle during which the thyristor VS1 isopen ultimately depends on the position of the slider of the variable resistor R1, which controls the current of the control electrode and, therefore, the firing angle.