Examples of using The float in English and their translations into Slovenian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Computer
-
Official/political
-
Programming
It was getting late in the float.
Screw in the float valve assembly.
Until then, enjoy the float.
The float is the old style cork.
Then place the float on the rail.
People also translate
The float must be properly identified.
First place winner in the float competition.
Watch the float and you don't have to worry.
Keeton, Minard, guys, help me move the float.
Clip the float needle spring to the float hinge.
It is important not to forget to fasten it around the float lever.
Beaver falls off the float onto his back and he's hurt.
You can control every aspect and direction of the float path for the rose.
Remove the float, float and valve assembly.
I disassembled the carb, and discovered the float settings were off.
Notice that the float is deteriorated and junked up with varnish.
Every year, the church chooses one girl to ride on the top of the float.
They sent me for testing is not the float that I ordered, and another.
If the float starts to twitch so we need to pull out a fish that is hooked.
When such activity is frequent, the float is known as a dirty float. .
The float participants throw flowers, sweets, and other small gifts to the crowds.
When I rebuilt the carb,I lost the little spring that holds the float needle to the float. .
The float switch ensures that the pump is automatically switched on when a specific level is exceeded.
A shuttle service that transports you from the town dock to the barge is included in the float fee.
I would try adjusting the float so it is slightly downward so it will shut off the flow of fuel sooner.
The Float stage maintains the battery at 100% battery charge without overcharging or damaging the battery.
Praktikantka-- reporter Sam Sparks arrives at the float, to illuminate the weather news, and standing on the pier and Flint, falls under the rain….
The float is liftet upwards by the rising liquid level in the tank until the magnetic field of the integrated permanent magnet activates a Reed contact.
I disassembled the float assembly, adjusted the float, and reassembled everything. Now it runs beautifully.
So, removing the float from the lever, carefully inspect for cracks, which can be completely soldered with a soldering iron.
