Examples of using Cleaned surface in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Bright and chemically cleaned surface with quality.
The cleaned surface will then be virtually residue-free.
Tantalum Sheet and plate are supplied with a cold-rolled and chemically cleaned surface.
Walk on the cleaned surface with sandpaper to make it as smooth as possible.
To do this, it needs to be applied to the cleaned surface and allow to dry.
Degrease the cleaned surface, then mechanically polish
brush immediately after grinding on the cleaned surface from dust.
Shake well- spray a thin layer on a cleaned surface- let dry for a few minutes.
Next, the cleaned surface, which bite food
When used in the food processing sector, the cleaned surface should be rinsed with plenty of water.
A perfectly cleaned surface is a fundamental requirement when the service life of the finished surface depends on a solid basis.
In case of applications in the food industry, the cleaned surface should be rinsed with water after cleaning. .
On the cleaned surface of the base plank waterproofing material,
finish by polishing the cleaned surface with the yellow microfibre cloth.
The blasted and cleaned surface may advantageously be primed with: HEMPADUR 15590.
as for many is much easier to paint the ceiling yellowed from time to time than to tear off pieces of old tiles, cleaned surface and glue after all these manipulations new.
Waxing protects the cleaned surface from fouling and helps to retain gloss longer.
Mechanical cleaning of the steel surface is critical to surface treatments as a thoroughly cleaned surface binds better to hot-dip galvanizing, paint and other corrosion protecting surface treatments.
Disinfection: all cleaned surface, cracks and wounds are treated with specialized means.
After cleaning the cleaned surface is poured with a thin layer of sand and clay.
Dry completely glue can be cleaned, but in this case, the cleaned surface will need to be painted, since the damaged film easily passes moisture,
Non-porous pad gives a wipe clean surface, ensuring minimum contamination.
Cleaner surface: The artificial surface is much cleaner without sand
In the prepared clean surface to lay down floor insulation material.
After removing the old ties carried out thorough cleaning surface- as described above. Repair.
Attaches easily and strongly to any clean surface and leaves no tape residue if removed.
Find a comfortable, well-lit, clean surface and put all the equipment within reach.
Lay out everything you need on a clean surface.
Place on a clean surface.
Place the capped needle on a clean surface.