Examples of using Safety function in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Safety function is LINA Open Mill' s priority.
Position switches with safety function series PS.
The safety function includes one or several valves.
Position switches with safety function- Lift switchgear.
Safety function that prevents accidental disconnect.
How do I notice that a safety function has been activated?
Safety function is LINA Open Mill's first consideration.
Automatic shut-off after 30 mins with double safety function.
Hydraulic safety Function combination For machine above 270.
is probably the best known safety function.
Bult-in safety function that turns off the water in case of a UV device failure.
This makes B&R one of the first manufacturers to offer this certified safety function.
In practice, this safety function is often applied as safely reduced speed.
The redundant design ensures that wiring errors do not lead to the loss of the safety function.
Safety function: when the battery is empty, the valve and the water flow are stopped.
If the lid is incorrectly assembled, the juicer won't work as the safety function is not properly activated.
Today this safety function is generally already built in, for example in anaesthetic equipment.
Many of the bigger agencies consider it important that the safety function is visible
Safety function to prevent PoE overloads,
BST safe brake module for safe brake control(SBC safety function) up to PL d in compliance with EN ISO 13849-1.
This safety function is activated when the unbroken key symbol
production code for active safety function etc.) are sometimes integrated.
Use as actuator with safety function in hazardous areas in zone 1,
the psychologist must, as a minimum, take into account the following criteria which are relevant to the requirements of each safety function.
Position switches with safety function are suitable for a wide range of applications in lift industry.
his authorised representative established in the Community places on the market to fulfil a safety function when in use
SIL levels for complete safety function are determined by not only the measuring and control equipment, but also by the valves and actuators being used.
Safety relays must always be designed in such a way that, if wired correctly, neither a fault in the device nor an external fault caused by the sensor or">actuator will lead to the loss of the safety function.
The route from machine to safety function and its assessment in an appropriate assessment tool may be complex,
Position switches with safety function are suitable for sliding