Examples of using Be pressed in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Be pressed on the steel coil a variety of patterns.
Fillets can not be curl or be pressed inside the mask.
It can be pressed into different patterns and colors according to need.
Fillets can not be curl or be pressed inside the mask.
Can be pressed to steel bloom use hydraulic packing machine, convenient storage and transportation.
Fillets can not be curl or be pressed inside the mask.
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.
In this way, The ores and rocks will be pressed and crooked and crushed.
Before it is started automatically, please check the filling system points rightly at the bottleneck and the plug can be pressed or not.
Pressure can be pressed to control the process requirements;
Shaping: Ndfeb powders in the mold will be pressed as ndfeb ingot.
The film can be pressed in compressor and then be pelleted.
Reinstall Tap When there is a problem can be pressed to reset.
The clutch element will be pressed only if there are no oil leaks in the system.
If they progress in front of this line they may be pressed and challenged.
Finely pulverized material will be pressed into ring die through two rotating press rollers.
Seeds tend to produce the best hemp oil, although the whole plant can be pressed for oil.
PVC Furniture film can be pressed on PVC profiles surface.
The double worms structure have the proper chopping course with big mouth of entering, while the raw material can be pressed smoothly inside.
The pressure lock of the steel grating can be pressed by the presser into the load flat steel to fix it.
In windy weather, when the wind influences the construction of HDPE liner, the HDPE liner to be welded shall be pressed firmly with sandbags.
In cases of heavy bleeding, the drug should be pressed against the bleeding surface with a tool with a flat polished surface.
Under the stress, Polycarbonate boards will break when PC plastic sheets stay with pads, made in some certain chemical material or plastic material, and be pressed strongly.
The centre backs when in possession can now be pressed and tackled by their opponents.
It is not through the round hole of the iron slice, the left hand is stabilized, the handle of the fuselage is pressed on the right hand, so that the spring can be pressed.
To ensure that the tape provides a tight fit, the profile should be pressed tightly to the joint for a few seconds.
Brief Introduction of the Glazed Tile Roll Forming Machine: It's true to name a regular metal roof panel with steps glazed roof tile roll forming machine, but not all the metal roof panels can be pressed with steps.
When the operation is used, when the needle is rotated, it will be pressed to the part where it is to be drilled or polished.
Maintenance Free Type Inner rings of maintenance free spherical plain bearings are made of hardened carbon chromium steel hardened stainless steel or copper alloy Carbon steel outer rings can be pressed around the inner ring or can have radial….