Voorbeelden van het gebruik van
Substrate surface
in het Engels en hun vertalingen in het Nederlands
{-}
Colloquial
Official
Ecclesiastic
Medicine
Financial
Computer
Ecclesiastic
Official/political
Programming
The substrate surface should be smooth.
De substraatoppervlakte zou vlot moeten zijn.
The final solution is poured onto the substrate surface.
De uiteindelijke oplossing wordt op het substraatoppervlak gegoten.
White substrate surface for large format digital printing.
Witte substraatoppervlakte voor groot formaat digitale druk.
The dosage varies with the roughness of the substrate surface.
De dosering variërt met de ruwheid van de substraatoppervlakte.
Substrate surface should be dry
De substraatoppervlakte zou droog moeten zijn
C is not completely cured by the spray layer on the substrate surface.
C wordt niet volledig genezen door de nevellaag op de substraatoppervlakte.
The substrate surface, the box and the bag may become black/purple.
De bovenkant van het substraat, de bak en de zak kunnen zwart/paars kleuren.
Consumption 250-800 g/m² per layer depending on substrate surface texture.
Verbruik 250- 800 g/m² per laag, afhankelijk van de structuur van de ondergrond.
Often substrate surfaces need treatment prior to job to achieve the desired result.
Vaak moeten ondergronden voorbehandeld worden voor het bedrukken om het gewenste resultaat te krijgen.
Consumption 200-300 g/m² per layer depending on substrate surface texture or.
Verbruik 200-300 g/m² per laag, afhankelijk van de structuur van de ondergrond.
Glass adhesive to the substrate surface must be clean,
Glas lijm op het substraatoppervlak moet schoon,
The ks137 is applied two-sided onto both the substrate surface and the EPDM membrane.
De ks137 wordt tweezijdig aangebracht op zowel de ondergrond als de EPDM folie.
It can be glued to a substrate(surface) using pressure-sensitive
Het kan aan een substraat(oppervlakte) worden gelijmd gebruikend pressure-sensitive
This phenomenon intensifies the effect of the plasma jet onto the substrate surface.
Dit fenomeen intensiveert de inwerking van de plasmastraal op de substraatoppervlakte.
The copper is etched away from the substrate surface to create the desired pattern.
Het koper wordt weggeëtst van het substraatoppervlak om het gewenste patroon te creëren.
It would seem that this is quite enough to think about the alignment of the substrate surface.
Het lijkt erop dat dit is genoeg om na te denken over de aanpassing van het substraatoppervlak.
Consumption 90- 100 g/m² per layer depending on substrate surface texture(apply two layers is advised).
Verbruik 90- 100 g/m² per laag, afhankelijk van de structuur van de ondergrond.
measurements are often made with respect to the lens or substrate surface.
wordt vaak gemeten ten opzichte van de lens zelf of het substraat.
the young emperors begin the ascent from the substrate surface up the walking legs of the maternal females.
beginnen de jonge keizers met het omhoog klimmen vanaf het substraatoppervlakte via de poten van de moederwijfjes.
between the laminate that is laid on the bare concrete, and laminated to the substrate surface is a huge difference.
tussen het laminaat die wordt gelegd op de kale beton en gelamineerd aan het substraatoppervlak is een enorm verschil.
open-Coatingcharacterized by the fact that about half of the substrate surface is coated with abrasive grains.
ongeveer de helft van het substraat bekleed is met schuurkorrels.
negative electrode plate electrostatic powder across the plate through hole parts attached to the substrate surface, are pressure-free printing.
negatieve elektrode plaat elektrostatische poeder over de plaat door gat delen gekoppeld aan de oppervlakte van het substraat, zijn druk-gratis afdrukken.
Fixture time and cure speed depends on adhesive, bonded substrate and surface cleanliness.
Fixatietijd en uithardingssnelheid hangen af van de kleefstof, het verlijmde substraat en de netheid van het oppervlak.
bonded substrate and surface cleanliness.
het verlijmde materiaal en de zuiverheid van het oppervlak.
Uitslagen: 24,
Tijd: 0.0415
Hoe "substrate surface" te gebruiken in een Engels zin
The substrate surface generally comprises both dielectric materials and conductive materials.
The sand roughs the substrate surface allowing for better paint absorption.
A first substrate surface is coupled to a second stiffener surface.
Better bonding between the substrate surface and the pyrolytic graphite would be achievedby leaving the substrate surface moderately rough.
Therefore, anestimate of photocatalyst area on a uniformly covered (no gaps) substrate surface is 2.094 times the substrate surface area.
Each substrate surface can be inspected before, during or after laser cutting.
Do I need to prepare the substrate surface before applying Aleene’s Snow?
These results confirm that graduated plasma treatment modulates the substrate surface energy.
Interdigitation and localization of RPE somas on substrate surface can be seen.
Thoroughly clean the underlying layer and wet the substrate surface if necessary.
English
Deutsch
Español
Français
عربى
Български
বাংলা
Český
Dansk
Ελληνικά
Suomi
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文