Примеры использования Recuperator на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
We dry with the recuperator More.
Recuperator, optimum efficiency for heat conduction…!
Heat recovery ventilation Recuperator.
Temperatures- Metering recuperator(all inputs and outputs).
Programmed automatic thermostat recuperator.
Extract recuperator temperature of the house dirty air.
Cylinder intake, ground heat exchanger, recuperator bypass.
Recuperator efficiency also decreases, the change in pressure with respect to the optimal.
Type 28: with two stage recuperator and integrated heat pump.
Low connection capacity due to an upstream installation of a recuperator.
Fireplace warms and cools recuperator, or disables the boiler solar.
In a recuperator, both media are separated by a wall through which heat is transferred directly.
In order to obtain the required efficiency, only a recuperator can be used.
Considering power of both recuperator fans about 250W-500W we have loose of enegry even worst.
Channel bonding HAD fire and ventilation recuperator is a mistake.
A recuperator operates by means of a direct heat exchange, a regenerator on the basis of an intermediate storage.
There are two main types of heat exchangers: a recuperator and a regenerator.
Discussed method allows for the recuperator air cooling and heating, respectively, in the summer in the winter.
An oven drier with a rocker system with electric or pneumatic drive 20. Recuperator(heat exchanger).
We have a similar situation with the recuperator, which has a theoretical efficiency of 80- 90%.
Recuperator, or Plate Heat exchanger: A sandwich of plastic or metal plates with interlaced air paths.
Additional outdoor water heater for leaving recuperator- using the heating vent(blow).
Radiator and heater must be connected in a closed circuit with circulation pump assembled on time cooler and recuperator.
A regenerator uses an intermediate storage and a recuperator operates by means of a direct heat exchange.
In addition to high-quality goods,two-stage drying with heat recovery allows you to reduce fuel consumption by about 25% compared to one-step drying without a recuperator.
Controlled ventilation system with a recuperator Amalva Rego HV400 or compatible(advanced control via RS- 232 TTL).
Three-way valve(cuttoff) to regulate the temperature of the water radiator,water heater in circulation recuperator or underfloor heating.
Recuperator burners utilizing part of the waste heat in the exhaust tract to preheat the combustion air and considerably contribute to energy saving.
So, Heat recovery ventilation is a perfect option for you, because recuperator stays in the centre of system and its task is energy saving.
For efficient cooling and heating installation we can create a water heat exchanger, submerged at the bottom of the well vertebral andradiator/ water heater before entering clean air to the recuperator.