Примеры использования Rotational speed на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Shaft rotational speed.
A continuous recording of disc or drum rotational speed;
Rotational speed: 1500 rpm-1.
Ω is the shaft rotational speed, rad/s.
Rotational speed of the rolling road.
Never exceed the PTO's rotational speed of 540 rpm.
ND rotational speed of rolling road.
The sliding control makes it possible to vary the rotational speed.
Rotational speed of the drive shaft- 540 rev/min.
The sediment is discharged by the blade at low basket rotational speed.
Rotational speed of the unbraked wheels of the axle.
The device supports both 33.3 and 45 rpm rotational speed.
Measured rotational speed range of 0,1Hz- 10kHz;
When set to"OFF" the set leaf-spreader rotational speed does not change.
Nw rotational speed of the unbraked wheels of the axle.
A frequency converter works as a rotational speed monitor in this case.
Nw rotational speed of the unbraked wheels of the axle.
Frequency converters monitor the rotational speed of wastewater pumps.
Rotational speed(RPM)4 IntelliPower IntelliPower.
Only begin cutting after the saw blade has reached its required rotational speed.
Rotational Speed of Mirror calender rolls(r/min) 0.15- 3.
Frequency converters monitor the rotational speed of the agitators that remove foam.
Rotational speed regulating knob with On/Off switch 2.
Mmin, Mmax are the minimum andmaximum torque maps as function of the rotational speed, Nm.
The rotational speed of the drive shaft 540 turns/ min.
The ceramic Ball Bearing is with high rotational speed comparing with steel ball bearing.
Rotational speed of diamond tool changes from 300 to 1300 RPM;
Good grinding performance can only be achieved using the correct and constant rotational speed.
Confirm your rotational speed setting by pressing on the rotary wheel.
Monitoring of inflow pumps with frequency converters working as rotational speed monitors.