Примеры использования Setting mode на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
New setting mode for new hands specially.
Start searching Display the setting mode.
Exit from setting mode if pressed and held.
Press the button and reset the setting mode 2.
Enter the setting mode by long pressing the button a.
Decrease parameters in the setting mode.
Setting mode Code value Functional product Setting value.
Increase the parameters in setting mode.
Under the multi-function setting mode, press the corresponding M1/M2 button.
Press Enter to enter manual setting mode.
Open the setting mode, the"Chat"- here is the history management of Yandex.
Press the M.C. dial to display the setting mode.
Setting Mode In the Setting Mode, you can set the time and stride length.
The indicators show the setting mode as below.
The display and indicator begin to flash to show that you are in clock setting mode.
In setting mode: B Scroll downwards within the setting modes. .
Selects the photography mode and setting mode.
In any mode(except a setting mode), press B to illuminate the display.
Press and hold this button to enter the 2nd alarm setting mode.
The watch will exit the setting mode automatically if you do not.
Pull out the crown to enter the alarm setting mode.
You can change PSM(Preferred Setting Mode) items listed in the table that follows.
Press the“SET” button to accept the change andadvance to the next setting mode.
In the time setting mode, press the MODE button to return to the clock mode. .
If you press‘Go Back' or‘Home' button,it will exit from the setting mode.
Display the setting mode 4 Select a device 5 Connect 1 Display the connection menu 2 Select DEVICELIST.
Confirm selection key: Press this button to confirm selection in UPS setting mode.
You can change PSM(Preferred Setting Mode) items listed in the table below and on pages 14 and 15.
Up key: Press this button to display previous selection in UPS setting mode.
In time setting mode, if no button is pressed within 5 seconds, the unit will automatically go to clock mode. .