Приклади вживання Breech Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The breech rope is visible.
Every barrel has a breech socket.
The Breech Block is lowered.
Best treatments to lose the breech.
Breech or foot presentation of the fetus;
I guess I was lucky? he was breech.
Once more into the breech dear friend.
The breech mechanism is a split sliding-block breech.
Grenade should be inserted from the breech side.
This created a breech between generations.
L11A3- This incorporated minor changes to the breech ring.
How would this breech baby enter the world?
Stronger material was used in fabricating the breech ring.
Baby's in breech. It can't be born like this.
Canon de 75 modèle 1897 breech mechanism.
Companies have to breech an existence duration threshold for.
The spade's time of travel, form the rear of the tray to the breech, is one second.
The breech mechanism is a downward sliding semi-automatic breechblock.
During loading the cartridgeis placed into the magazine opening by open breech.
The breech ring was square in section and 320 millimetres(13 in) on a side.
In the same direction- from the breech to the muzzle- should move and ramrod.
Shotgun speedloaders are slightly more complex,since shotgun magazines load from the breech.
Mainly due to the fact that the new gun breech is made in sizes of existing caliber 120-mm and 125-mm.
In comparison, the Gatling gun offered a rapid andcontinuous rate of fire without having to manually reload by opening the breech.
It chambers the cartridge, but instead of coming to rest against the breech face, it follows the case a small distance into the chamber.
It introduced the integral muzzle reference system and a smaller and lighter fume extractor whichrequired the addition of 7.7 kilograms(17 lb) of weight at the breech for balance.
The main disadvantage of direct impingement is that the breech of the firearm's firing mechanism becomes fouled more quickly due to being exposed to the residues of the burned cartridge propellant.
The piezo measuring device(transducer)is positioned at a distance of 25 millimetres(0.98 in) from the breech face when the length of the cartridge case permits that.
When the length of the cartridge case is too short, pressure measurement will take place at achambering specific defined shorter distance from the breech face depending on the dimensions of the case.