Приклади вживання Must be cut Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
He must be cut out.
Hundreds of trees must be cut.
Rosehip must be cut every year.
Unemployment benefits must be cut.
It must be cut along the spine.
Spending can and must be cut.
Month must be cut split ends.
What is infected must be cut out”.
When growing a snowberry as a hedge in summer, the plant must be cut.
For this, shoots must be cut to the stump.
If they are available, they must be cut.
All SEAM must be cut and be 2,5 cm.
Venezuela's foreign aid projects must be cut as well.
Before this thread must be cut length of 20-25 centimeters.
The remaining tip to three centimeters in length must be cut.
Population must be cut, by coercion if necessary.
When a pig is gutted, it must be cut in half.
Some tiles must be cut or drilled, so that a certain number will be discarded.
If a woman wants to have healthy long hair, they must be cut.
But useless military spending must be cut, not increased," Di Maio said on Rai3 television.
As he mostly is in a house, his claws are not almost ground off in natural way,therefore they must be cut at least one time per a month.
To begin with, the flesh must be cut into portions and soak it for a day in a weak acetic solution(2%).
With this winding, after the formation of the flower, the cardboard forms must be cut to pull them out of the center.
Leaves the landing member must be cut to 1/3 length, and the length of the root is to leave no more 10 cm.
To do this, all that is above the 5-6 sheet must be cut and put in a jar of water.
Withered buds must be cut, the bushes divided and transplanted every five to six years, watering is only needed in case of drying of the soil.
To bend a sheet of corrugated cardboard, it must be cut with a metal knife from the outside of the fold line.
Besides that it must be cut with a sharp knifeWhen combining and adjusting, the corners can easily break off- this increases the number of defective parts and glue consumption.
The edges of plasterboard walls must be cut at a 45 degree angle, and a right angle is formed at the intersections of the sheets.
Those hairs that go over the line, must be cut with scissors, but do so carefully, otherwise you can ruin the whole image that is often.