영어에서 Limit value 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Time to reach limit value.
Lower limit value VDC 18.
Enter a Knockout Limit value.
Daily exposure limit value: Â Should never be exceeded 2.5.
Enter an Overprint Limit value.
ACGIH Threshold Limit Value(8 hr. time weighted average).
Colour change within 2 to 3 seconds if limit value is exceeded.
If the speed limit value is exceeded, the drive is shut down safely.
Time to reach action value Time to reach limit value.
The ready and control states of the limit value relay are indicated by LEDs.
A warning dialog will be shown to you about the Action Limit value 0.
Table 2 The limit value of toxics smoke concentration(Unit: ppm).
The smoke toxicity concentration was less than the limit value in table 2.
The maximum permitted limit value is 0.5 Î1⁄4g/cm2 of nickel precipitation per week.
Note Selecting different time or frequency units for axes limit values does not change any plots.
More strict limit value for performance loss after all tests: max.5%(IEC: 8%).
Here, the level had to be measured and, once a limit value was reached, an alarm given off.
Test criteria and limit values in many cases go far beyond applicable national and international standards.
Simultaneously, the HEV test system load decreases through fast reaction when limit values are exceeded.
As a result the test criteria and the limit values in many cases clearly go beyond national and international standards.
On the Time, Spectrum, Persistence Spectrum, Spectrogram, orScalogram tab, enter the axes limit values.
In rooms and also in air ducts, various humidity limit values must be complied with in many production processes.
When setting axes for a display, you can specify time or frequency units before specifying limit values.
By observing this statutory limit value, we can ensure that the risk of an allergic reaction to nickel in our products is reduced to a minimum.
A warning dialog will be shown to you about the Action Limit value 0. Continue by clicking"Yes".
The CPM solution also shows how many times the operator had to intervene, and how often the control loop reached its limit values.
Process integrity and mixture accuracy are also enhanced by defining the min./max. limit values of the hydrogen content of the gas mixture.
Recorded data and associated limit values including warnings and error messages can be visualized in the TruControl laser control system.
The PX878 output module also has fast digital outputs that are able to signal and transmit the limit values within one millisecond.
Specific limit values for the total content of the toxic heavy metals arsenic and mercury have also been defined in both the Standard 100 and Leather Standard.