What is the translation of " MICROSTRUCTURE " in Croatian?

• mikrostruktura
• mikrostrukture
• mikrostrukturu
• mikrostrukturi

Examples of using Microstructure in English and their translations into Croatian

Results: Micrographs showed difference in microstructure, homogeneity and grain size.
Rezultati: Mikrografske snimke odljevaka obiju legura bile su različite u mikrostrukturi, homogenosti i veličini zrna.

Heat treatment should be carried out immediately after welding in order to prevent the formation of delayed cracks, eliminate stress and improve microstructure.
Toplinsku obradu treba provoditi odmah nakon zavarivanja kako bi se spriječilo stvaranje zakašnjelih pukotina, uklonili stres i poboljšali mikrostrukturu.

The influence of different thermal deformation conditions on Microstructure and deformation mechanism was studied by TEM and EBSD.
Utjecaj različite toplinske deformacije uvjetima na mikrostrukturu i deformacije mehanizam je studirao TEM i EBSD.

In metallography and metallurgy, polishing is used to create a flat, defect-free surface for examination of a metal's microstructure under a microscope.
U metalografiji i metalurgiji poliranje se koristi za stvaranje ravne površine bez grešaka(defekata) za ispitivanje mikrostrukture metala pod mikroskopom.

Effects of Fe and O contents, heat treatment process and microstructure of impurity elements on mechanical properties of gr.17 titanium-palladium alloy.
Utjecaj sadržaja Fe i O, procesa toplinske obrade i mikrostrukture elementa nečistoća na mehanička svojstva legure titan-paladija gr.17.

Polarizations, or overpotentials, are losses in voltage due to imperfections in materials, microstructure, and design of the fuel cell.
Polarizacije su gubitci u naponu zbog nesavršenosti u materijalima, mikrostrukturi i dizajnu gorivog članka.

The presented results were obtained from microstructure examination of Al alloy 2024 ingots casted with or without electromagnetic field.
Prikazani rezultati su mikrostrukturna analiza uzoraka aluminijske legure Al 2024 koji su dobijeni kontinuiranim lijevanjem pod djelovanjem i bez djelovanja elektromagnetnog polja.

Beta stable elements of alpha and beta alloys containing a certain amount of phase equilibrium, alloy microstructure for the alpha and.
Beta stabilne elemente alfa i beta legura koje sadrže određenu količinu faza ravnoteže, legure mikrostruktura za alfa i.

Martensite can be a kind of microstructure of steel at normal room temperature, but Austenite is only a kind of microstructure in the process of heating.
Martenzit može biti vrsta mikrostrukture čelika pri normalnoj sobnoj temperaturi, ali Austenit je samo vrsta mikrostrukture u procesu zagrijavanja.

According to the two types of hot rolling and cold rolling, according to the microstructure characteristics of steel, divided into 5 categories.
Prema dvije vrste vrućeg valjanja i hladnog valjanja, prema mikrostrukturnim karakteristikama čelika, podijeljeno je u 5 kategorija.

The forging temperature determines the microstructure of the titanium alloy and it is inevitable to produce β phase transformation during the forging process of titanium alloy.
Temperatura kovanja određuje mikrostrukturu titanove legure i neizbježno je proizvesti transformaciju β faze tijekom proces kovanja titanove legure.

However, for the final annealing of the product, the influence of the annealing process on the microstructure and mechanical properties must be determined by experiments.
Međutim, za konačno žarenje proizvoda mora se eksperimentima utvrditi utjecaj postupka žarenja na mikrostrukturu i mehanička svojstva.

Secondly in the alloy The blank and the finished die forging process are controlled by appropriate forging and cooling methods to suppress the occurrence of coarse a blocks in the microstructure.
Drugo, u leguru Prazan i gotov postupak kovanja matice kontrolira se odgovarajućim metodama kovanja i hlađenja kako bi se suzbio pojava grubih a blokova u mikrostrukturi.

It can provide a deeper understanding of changes in the chemical functionality and microstructure of various materials and their influence on processing and applications.
Može omogućiti dublje shvaćanje promjena u kemijskoj funkcionalnosti i mikrostrukturi raznih materijala i njihovog utjecaja na obradu i primjene.

The velocity causes the microstructure that already contains the subgrain boundary to further become a uniform fine microstructure after processing, and the fine tissue can be retained due to the temperature reduction of the tube wall without dynamic recrystallization;
Brzina uzrokuje mikrostrukturu koja već sadrži granicu podgrupa kako bi postala ujednačena fino mikrostruktura nakon obrade, a fino tkivo može se zadržati zbog smanjenja temperature zida cijevi bez dinamičke prekristalizacije;

With the combination of alloying with chromium and nickel, steel types 18/8(18% Cr and 8% Ni) have been developed, with austenitic microstructure, which are resistant to acid.
Kombinacijom legiranja kromom i niklom razvijeni su čelici tipa 18/8(18% Cr i 8% Ni), s austenitnom mikrostrukturom koji su otporni na djelovanje kiselina.

Optimization of TPB length can be done by processing conditions to affect microstructure or by materials selection to use a mixed ionic/electronic conductor to further increase TPB length.
Optimizacija duljine TPB može se postići utjecanjem na mikrostrukturu ili odabirom materijala kako bi se uporabom miješanog ionskog/električnog vodiča povećala duljina TPB.

In this paper, the heat treatment process of TC4 titanium alloy plate is carried out to study the influence of the heat treatment process on the microstructure and mechanical properties of materials.
U ovom radu provodi se postupak termičke obrade TC4 TITANIJUMNOG PLOČA za proučavanje utjecaja procesa toplinske obrade na mikrostrukturu i mehanička svojstva materijala.

Through the heat treatment and other measures to make the material microstructure changes, thereby enhancing the strength of parts, stiffness or toughness, can effectively reduce the weight of parts.
Kroz toplinsku obradu i druge mjere promjene materijala mikrostrukture, time povećava snagu dijelovima, krutosti i žilavosti, učinkovito možete smanjiti težinu dijela.

The results were compared to an Abrasion Resistence Index determined by microhardness and volume fraction of microstructure constituents, and microhardness of abrasives.
Rezultati su uspoređeni s indeksom otpornosti abraziji Rab koji se određuje na temelju mikrotvrdoće i udjela konstituenata mikrostrukture i mikrotvrdoće abraziva.

The results show that the dynamic recovery and dynamic recrystallization microstructure evolution of Ti-5553 alloy under this hot deformation condition will occur, and the phase and the phase of the alpha phase are not strictly followed by Burgers.
Dinamičan oporavak i dinamičan prekristalizacija mikrostruktura evolucije Ti-5553 legure pod ovo vruće deformacije stanje, da će se dogoditi i u fazi i fazi alfa fazi nije strogo slijedi Burgers.

Gas welding and air cutting application is more flexible, but the heat-affected zone of welding is larger, which makes the deformation and microstructure change and the performance decreases.
Zavarivanje plina i primjena rezanja zraka su fleksibilnija, ali toplina zahvaćena zona zavarivanja je veća, što čini promjenu deformacije i mikrostrukture, a performanse se smanjuju.

In short, intergranular corrosion is the precipitation of carbon from saturated austenite microstructure in the form of Cr23C6, which reduces the content of chromium in the Austenite microstructure at the grain boundary.
Ukratko, interkristalnoj koroziji je taloženje ugljika iz zasićene austenita mikrostrukture u obliku Cr23C6, što smanjuje sadržaj kroma u austenita mikrostruktura na granici zrna.

After forging the above two typical two-phase titanium alloys, the primary a equiaxed content in the microstructure decreased sharply, and the a lath content increased correspondingly.
Nakon kovanja gornjih dviju tipičnih dvofaznih legura titana, primarni sadržaj a ekviksacije u mikrostrukturi naglo se smanjio, a sadržaj a letvice odgovarajuće povećao.

Semi-clear crystal, photomicrograph shown in Figure 1c, microstructure is a slat+ a isometric+ β turn, a isometric number is rare, a slab number is mostly, there is intermittent distribution grain boundary a; It is a fuzzy crystal in the range of~20mm.
Polu-bistri kristal, fotomikrograf prikazan na slici 1c, mikrostruktura je a let+ a izometrijska+ β skretanja, a izometrijski broj je rijedak, a ploča je uglavnom, postoji granica zrna s povremenom raspodjelom a; To je nejasan kristal u rasponu od~ 20 mm.

Acid-catalyzed sols derive from the highly entangled polymer chains showing a very fine microstructure and very small pores that appear quite uniform throughout the material.
Kiselina katalizovanih sols proizilaze iz veoma isprepletenih lanaca polimera pokazuju vrlo fine mikrostrukturu i vrlo male pore koje se pojavljuju dosta ujednačen u cijeloj materijala.

Through isothermal strain rate high temperature tensile test, the evolution of microstructure and properties of TC4 titanium alloy at different deformation temperatures was studied, and the effect of deformation on the microstructure evolution and phase transition of titanium alloy and its change with temperature were emphasized.
Ispitivanjem visokih temperatura zateznih izotermalnih naprezanja ispitivano je evolucija mikrostrukture i svojstva TC4 titanove legure na različitim temperaturama deformacije, te je naglašen utjecaj deformacije na razvoj mikrostrukture i fazni prijelaz titanove legure i njezinu promjenu s temperaturom.

Advantages: the casting structure of ingot can be destroyed, the grain size of steel can be refined, and the defects of microstructure can be eliminated, so that the microstructure and mechanical properties of steel can be improved.
Prednosti: lijevačka struktura ingota može se uništiti, veličina zrna čelika može se rafinirati i oštećenja mikrostrukture mogu se poboljšati, tako da se poboljšaju mikrostruktura i mehanička svojstva čelika.

By studying the influence of these concentrated heat treatment processes on the microstructure and mechanical properties of TC4 titanium alloy rods, the best matching heat treatment process of the TC4 alloy can be obtained.
Proučavanjem utjecaja ovih procesa koncentrirane toplinske obrade na mikrostrukturu i mehanička svojstva šipki TC4 od titanove legure može se dobiti najbolji postupak toplinske obrade legure TC4.

After swaging on a heated hammer at 940° C(alloy phase transition point 995° C), the microstructure of the die forging part is shown in Fig. 2b, and the initial a equiaxed content is only about 15%, which is caused by overheating of the forging temperature.
Nakon prebacivanja na zagrijani čekić na 940 ° C(točka faze prijelaza legure 995 ° C), mikrostruktura dijela kovanog kalupa prikazana je na slici 2b, a početni a izjednačeni sadržaj je samo oko 15%, što je uzrokovano pregrijavanje temperature kovanja.