Examples of using Specified temperature in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
In a material at some specified temperature.
For an element: the form in which the elementis most stable under 1 bar of pressure and the specified temperature.
Cooling load: The amount of cooling required to keep a building at a specified temperature during the summer, usually 78° F, regardless of outside temperature. .
A Newtonian fluid can thereforebe defined by a single viscosity value at a specified temperature.
Purpose: The surface of the powder coating heated to the specified temperature and the corresponding time, so that the melting, leveling, curing, to get the effect we want the workpiece surface.
Ensure that the working environment is within the specified temperature range.
Purpose: To heat the powder coating on the surface of the workpiece to the specified temperature and keep it for the corresponding time to melt, level and solidify, so as to get the surface effect of the workpiece we want.
The reference state is the most stable state of an element at the specified temperature and 1 bar.
A procedure for testing the fluidity of a residual fuel oil at a specified temperature is described in Appendix X1. 1.2 Several ASTM test methods offering alternative procedures for determining pour points using automatic apparatus are available.
The reference state is the most stable state of an element at the specified temperature and 1 bar.
Sealed containers are cooked at a specified temperature, for a desired time, to destroy all living organisms that may be present(bacteria, viruses, mold) that could otherwise grow in the sealed container and cause illness in people or pets.
Carnot cycle is the most efficient cycle operating between two specified temperature limits.
A fire happens→ the temperature climbs high fast→ temperature exceeds the specified temperature of the temperature sensing glass ball→ the temperature sensing glass ball is burnt by the high temperature→ the fm200 fire agent comes out from the cylinder through nozzle for putting out the fire.
The generator can resume thesonication automatically when the liquid reached the specified temperature again.
The zero-power resistance is thedc resistance value of a thermistor measured at a specified temperature with power dissipated by the thermistor low enough that any further decrease in power will result in not more than 0.1%(or one tenth of the specified measurement tolerance, whichever is smaller) change in resistance.
Cooling load- The amount of cooling required to keep a building at a specified temperature during the summer, usually 78?
A solvent(from the Latin solvere,“loosen”) is a liquid, solid, or gas that dissolves another solid, liquid, or gaseous solute, resulting in a solution thatis soluble in a certain volume of solvent at a specified temperature.
The stronger the air flow,the more electricity must be supplied to it in order to maintain the specified temperature difference between the wire and the air flowing around it.
This represents the change in capacitance with temperature, expressed linearly as parts per million per degree centigrade(ppm/°C),or as a percent change over a specified temperature range.
Evaporation can happen at any temperature, while boiling happens only at a specified temperature called the"boiling point".
Sprinkler is one component of fire extinguishing system in the form of nozzle which is useful to extinguish the fire automatically and this alar is part of fire sprinkler system that will discharge the water when it detected fire,or when it has exceeded the specified temperature.
Gas boilers, which are the most common type of boilers in the USA,produce steam by heating water to a specified temperature or boiling point with a natural gas flame.
Temperature Coefficient(TC): The change in capacitance with temperature expressed linearly as parts per million per degree centigrade(PPM/°C) or as a percent change over a specified temperature range.
Being a reversible cycle,the Carnot cycle is the most efficient cycle operating between two specified temperature limits.
We have mentioned repeatedly that the Carnot cycleis the most efficient cycle operating between two specified temperature limits.
The stem bear pulled in the valve opening and closing process, and compression and torsion force, and direct contact with the media, as well as the relative motion between the friction and filler, so in the choice of stem material,must ensure that it has enough strength in the specified temperature, good impact toughness, abrasion resistance, corrosion resistance.