Examples of using Specified temperature in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Washing, normal process, with specified temperature.
In addition, the specified temperature should not be exceeded.
Washing, very mild process, with specified temperature.
Gentle washing at specified temperature and gently spin, so at low speed, usually synthetic laundry.
Washing, mild process, with specified temperature.
Order to reduce the residual stress from blanking operation wherever required Stress relieving is done on specially designed furnace with specified temperature.
Fine wash or wool cycle at specified temperature, do not spin!
Density refers to the mass of the substance contained in the unit volume at the specified temperature.
It is ground and heated under specified temperature and compressed.
Generally low temperature into the furnace, andthen to 100 degrees Celsius/h heating rate is heated to the specified temperature.
Please do not use the micro switch under the specified temperature and outdoor air conditions.
There are 5 part for EN 10216 standards, each part specify the delivery condition for alloy ornon-alloy seamless steel tubes at specified temperature.
The test is conducted in special climate cabinets with specified temperature and humidity in order to document the quality of the products throughout their entire shelf life.
Washing bowl with indication of temperature- Wash laundry at this specified temperature, not hotter.
Annealing is a production process in whichmetals andalloys are heated to a specified temperature, and then, together with the furnace in which the procedure took place, very slowly cool naturally.
The generator can resume the sonication automatically when the liquid reached the specified temperature again.
The irreversible label can be checked at any time to see if the specified temperature has been reached.
The irreversible temperature tag is a one-time tag that indicates that the specified temperature has been reached.
Many components have a specification where the rise in temperature should not exceed a specified temperature per second, such as 2 °C/s.
Many components have a specification where the rise in temperature should not exceed a specified temperature per second, such as 2 °C/s.
This will allow you to specify temperatures and speeds.
Heat the fats andoptional ingredients to the temperature specified in the recipe.
Adjust the gas supply to the burners to the temperature specified in the recipe and required for the cooking method. Electric.
Add a glass or stainless steel thermometer to the lye/water andwait until it reaches the temperature specified in the recipe.
When both the fat and the lye/water reach the temperature specified in the recipe, add the lye/water to the fat.
Due to its low thermal nuclear capture cross-section properties, the Nb-1Zr alloy has been closely associated with the nuclear industry,which requires specified elevated temperature strength in the range of 1800° F to 2200° F.