Examples of using Optical microscope in English and their translations into Russian
{-}
-
Official
-
Colloquial
Certus Optic SPM+ Optical Microscope.
Optical microscope(upright or inverted);
Microphotographs camera+ optical microscope.
Optical microscope- for non-SPM microscopic studies.
Certus NSOM- Near-Field Scanning Optical Microscope.
Built-in optical microscope provides a convenient search for a place for measurements.
Fractionation of particles was controlled visually by an optical microscope.
These areas appear white under an optical microscope, due to their low-etching response to the etchant.
Precise SPM probe positioning with optical microscope.
Trinocular optical microscope with the ability to observe the sample in both the eyepieces and the video camera.
Additionally, a method for checking the dimensions of the nick, such as an optical microscope.
An optical microscope can be regarded as a system of lenses, which provides a magnified image of a small object.
Cantilever was placed on a special holder and lowered in the culture dish with cells located on an optical microscope.
Optical microscope with magnification up to 90-times for incoming and outgoing control prior to and after coating.
Liver matrix structure was studied using an optical microscope Саrl Zeiss Axiovert 25(Jena, Germany) with a camera Axio Cam HRC Carl Zeiss, Germany.
Optical microscope with high resolution(up to 1000 times) to measure coating thickness and its adhesion with a tool.
This feature is designed for measuring the slope of the growth hillock on the surface of the crystal based on the interference pattern recorded with an optical microscope.
For management of position of an optical microscope objective on axis Z at obtaining of the spectral information use the slider Objective Z, μm.
Development and testing realization of the new optical microscopy method,which allows to examine objects sixfold smaller than usual ones with the use of common optical microscope;
The combination with an inverted optical microscope has meaning only in the study of the surface of transparent samples.
Dhokhar and his colleagues made a big step toward creating the latter by developing a technique for"three-dimensional" recording of information in the form of holograms in such"defective" diamonds using an optical microscope and a set of lasers that manipulate charges inside nitrogen defects in a gemstone crystal.
Optical Microscope: The optical microscope helps determine the size and shape of sands and ground products and helps with micro-fracture identification.
A project to create a complex"miniature bioreactor- an optical microscope- the atomic force microscope" and software for long-term analysis of living cells is performed S.
The optical microscope, often referred to as the“light microscope“, is a type of microscope which uses visible light and a system of lenses to magnify images of small samples.
Positioning is applied for indentation, to obtain of spectroscopycurves in SPM modes, and in aggregate with an optical microscope allows to precisely position the probe for prompting on a site of a research object surface.
In the second way, the optical microscope is tilted back in non-working position, andSPM is put on seats then the optical microscope is came back in a working position.
Key discoveries, such as the development of laser scanning confocal microscopy and spinning-disc confocal microscopy,have made the optical microscope one of the most versatile and powerful tools for solving problems in modern cell biology 7, 8.
A Scanning head Certus B Optical microscope C Digital video camera D Base with mechanical motions for samples and optical video microscope positioning Fig.
Jasinski team and IHMT NASB completed project to build the first domestic scanning near-field optical microscope in which the AFM modification was created based on tuning fork sensor, realizing scanning in dynamic lateral forces mode.
Videomicroscope Optical microscope with a digital camera is used for obtaining magnified images of objects of study sites and for the images latching, SPM probe positioning relative to the sample surface.