What is the translation of " PHASE DIFFERENCE " in Slovenian?

• fazno razliko
• fazna razlika
• fazne razlike

Examples of using Phase difference in English and their translations into Slovenian

The phase difference is the same.
Kadar pa je fazna razlika enaka ϕ.

Power factor= cosφ= the cosine of the phase difference φ between I and U.
Faktor moči= cosφ= kosinus fazne razlike φ med I in U.

This will make a phase difference when current will flow through the both coils.
To bo fazno razliko, ko bo tok teče skozi obe tuljave.

Optically, a glass-like sheet used to create a phase difference.
Optično, steklena podobni stanja uporabljajo za ustvarjanje fazne razlike.

What is the phase difference between points C and D?
Koliko je časovno razlika med potjo C in D?

In three phase system, there are three single phase line with 120° phase difference.
V trofazni sistem, obstajajo tri enofazni linijo 120 ° fazno razliko.

That is, the measurement of the phase difference in the actual power operation.
To pomeni merjenje fazne razlike v dejanskem delovanju moči.

CLC1 and the input capture(IC) peripheral are used for determining the magnitude of phase difference.
CLC1 in periferni vhodni zajem(IC) se uporabljata za določanje velikosti fazne razlike.

So the rotating magnetic field has the same phase difference which will make the rotor to move.
Torej je rotirajoče magnetno polje, ki imajo enak razliki faz, ki bo rotor za premikanje.

The phase difference between the two beams results in a change in the intensity of the light on the detector.
Fazna razlika med dvema curkoma povzroča spremembo jakosti svetlobe na detektorju.

The CLC can be used to measure the phase difference between two signals of the same frequency.
CLC se lahko uporablja za merjenje fazne razlike med dvema signaloma iste frekvence.

The distance between the receiver and the scanned point is calculated based on the measurement of phase differences.
Razdalja med sprejemnikom in obravnavano točko se izračuna na osnovi meritve faznih razlik.

So the rotating magnetic field is having the same phase difference which will make the rotor to move.
Torej je rotirajoče magnetno polje, ki imajo enak razliki faz, ki bo rotor za premikanje.

The measured phase difference should not be greater than 2% compared with the phase difference measured in the previous part.
Izmerjena fazna razlika ne sme biti večja od 2% v primerjavi s fazno razliko, izmerjeno v prejšnjem delu.

Fundamental current allowable error≤1% FS Measuring the phase difference between the fundamental voltage and current error:≤0.5°.
Osnovna dopustna napaka ≤1% FS Merjenje fazne razlike med osnovno napetostno in tokovno napako: ≤0,5 °.

The path difference, the difference in the distance traveled by each beam, creates a phase difference between them.
Razlika v poti, razlika razdalj, ki sta jih prepotovala curka, med njima povzroči fazno razliko.

If a single beam has been split along two paths, then the phase difference is diagnostic of anything that changes the phase along the paths.
Če se je en curek razdelil vzdolž poti, je fazna razlika pokazatelj tega, kar na tej poti spreminja fazo.

The signals from the four different paths were recombined in the receiver where a phase corrector removed the phase differences of each signal.
Signali iz štirih različnih smeri so bili rekombinirani v sprejemniku, kjer fazna korekcija odpravlja fazno razliko vsakega signala.

Results(in phase, interphase) using A standard, phase difference acuity≥30° for out phase, the phase difference< 30° are in phase..
Rezultati(v fazi, vmesni fazi) z uporabo standardne, ostrine fazne razlike ≥30 ° za zunanjo fazo, fazna razlika.

With frequency measurement, phase measurement function, can measure the current, voltage frequency(display a cycle of time, that is, cycle) and the two signals between the phase difference(time).
Z merjenjem frekvence lahko funkcija merjenja faz izmeri trenutno, napetostno frekvenco(prikaže cikel časa, to je cikel) in dva signala med fazno razliko(čas).

The transmitted and received waves are used as inputs to the CLC and the phase difference between the two signals at the CLC output can be used for calculating the distance between the source and target.
Oddani in prejeti valovi se uporabljajo kot vhodni podatki za CLC in fazna razlika med dvema signaloma na izhodu CLC se lahko uporabi za izračun razdalje med virom in tarčo.

As light passes from one medium to another, the difference between the index of refraction in the adjacent surfaces creates transitional phase difference, which increases the amount of light reflected.
Ko svetloba prehaja iz enega medija na drugo, razlika med indeksom lomnega premeščanja na sosednjih površinah ustvari prehodno fazno razliko, ki poveča količino odbite svetlobe.

After applying external energy, the phase change can be realized, and the phase difference between the two beams can be controlled to realize the Mach-Zehnder Interference(MZI) to realize the intensity modulation of the output optical signal.
Po uporabi zunanje energije se lahko izvede sprememba faze, fazna razlika med obema žarki pa se lahko kontrolira tako, da se doseže Mach-Zehnder interferenca(MZI), da se doseže modulacija jakosti izhodnega optičnega signala.

Phase shift is any change that occurs in the phase of one quantity, or in the phase difference between two or more quantities.
Fazni zamik' je kakršnakoli sprememba, ki se zgodi v fazi določene kvantitete, ali v fazni razliki med dvema ali več kvantitetama.

The chamfer is essentially a small chamfer, Miter Gearbox that is, all the exposed sharp corners after the tooth profile of the gear, and then a small chamfer, in order to have a large chamfer at both ends of the gear(that is, Angle) phase difference, it is called chamfering.
Skobelj je v bistvu majhen posnetek, Miter Gearbox, ki je, vsi izpostavljeni ostri koti po zobnem profilu orodja, nato pa majhen posnetek, da bi imeli veliko posnetek na obeh koncih prestave(to je, kot) fazna razlika, se imenuje klesanje.

After the current is stabilized, the microcomputer system obtains the voltage and current waveform data through the A/D converter, and performs digital filtering to calculate Voltage V45 and current I45 and their phase difference, further calculate impedance Z45, resistance component R45 and reactance component X45.
Po stabilizaciji toka mikroračunalniški sistem pridobi podatke o napetosti in trenutni valovni obliki preko A/ D pretvornika in izvede digitalno filtriranje za izračun napetosti V45 in toka I45 ter njihove fazne razlike, nadalje izračuna impedanco Z45, komponento upora R45 in komponento reaktancije X45.

For transformers of 160kVA and below, the difference in phase resistance is generally not greater than three.
Pri transformatorjih 160kVA in manj razlika v fazni upornosti običajno ni večja od treh.

In technical sciences, the phase shift is the difference in the oscillation phase of two equal frequency processes.
V tehničnem smislu je fazni premik razlika v fazi utripanja dveh utripajočih procesov enake frekvence.

Resistive current fundamental wave= full current fundamental wave• cosφ, φ is the phase angle difference of full current to voltage fundamental wave.
Uporni tok, temeljni val= temeljni tok polnega toka• cosφ, φ je razlika faznega kota pri polnem toku do napetosti.

In this phase too, the difference in information sources between then and now is enormous.
Tudi v tej fazi je razlika med informacijskimi viri med zdaj in zdaj ogromna.