Voorbeelden van het gebruik van Mechanical method in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Table 1- Mechanical methods.
Mechanical methods can also be used, as well.
Filling via vibropress- mechanical method of molding.
The mechanical method is the easiest.
As such, lasers outshine conventional mechanical methods.
Therefore, the mechanical method is more preferable.
For mixing paints can be used manual or mechanical method.
Mechanical methods of placing packing material.
Whitworth thread, manual and mechanical method of cutting.
Mechanical methods for the destruction of dust mites.
It can be done by a variety of chemical and mechanical methods.
Means of propulsion” means the mechanical method by which the watercraft is driven;
Traditional cleaning is carried out by chemical and mechanical methods.
The mechanical method of turning bamboo into a fabric is much more environmentally friendly.
An effective method is sometimes also called a mechanical method or procedure.
The mechanical method of processing of tires- the mostcommon method of processing.
Removing the old paint from the heating pipes- chemical and mechanical methods.
is made with the mechanical method, where only with pressure is pressed.
They always focus on providing the best with the help of their mechanical methods.
If the mechanical method does not help to correct the situation,
pretreating cable scrap using only cold/mechanical methods;
The advantage of a mechanical method is its relative safety for people working in the room,
to be included with the work order, users often prefer mechanical methods of ignition protection.
The impact of mechanical methods on the climate can be set against the risks involved in the use of pesticides.
power consumption is several times smaller than when using only a mechanical method.
Means of propulsion': the mechanical method by which the craft is driven,
The life of a ceramic casting mold is comparable to that of a mold made by a mechanical method, and the manufacturing cost is lower than that of a mold made by a machining method. .
This mechanical method of VTE prevention presents no risk of bleeding
Handle deformities utilizing mechanical methods, including whirlpool
The mechanical method can be divided into: