Примеры использования Limit switch на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Limit switch Omran Japan.
Capacitive Level Limit Switch NTS.
Limit switch stop for drilling depth.
Contactless Limit Switch Item 12, Fig. 1.
Limit Switch for the BM 26 A Bypass Level Indicator.
Sp Status output/ limit switch passive.
The limit switch is in the correct position.
Capacitive Level Limit Switch for bulks NSC.
Figure 4-2: Connection limit switch type MS14.
Limit Switch Type 055.000.5 Mechanical Operation.
Figure 4-3: Connection limit switch type TG21.
Buttons and limit switch monitoring with fault message display.
Also elevator shutter closes to middle limit switch.
Connect the limit switch to the electrical circuit.
Carefully read the ATEX approval certificate for the limit switch.
Fine adjustments to the limit switch trigger point.
Limit switch inoperable, defective locking device.
How to connect the limit switch to an electrical circuit.
Limit switch allowing the motor to switch off once the cycle is finished.
Even if installed, the opening limit switch is not read in this phase.
The limit switch agrees with protection category IP6X for dust.
Adjust the relevant cam so that the opening limit switch is triggered in this position.
Hold the limit switch tightly in this position and tighten the clamp.
If you put insulation around the bypass level indicator,do not cover the limit switch housing.
When the ball gap limit switch is actuated, an indication is given;
The limit switch signal can also be used for further control functions.
Status output/ limit switch SN according to NAMUR EN 60947-5-6 Ex i.
Limit Switch If the switch has detective voltage, its range is(3-24)V.
Adjustable limit switch DP-AMM Electrical micro-switch mounted in the indicator housing.