Примери коришћења Second layer на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
The second layer of paint.
He forgot the second layer.
The second layer is also dried in a lamp.
Now it's about time for the second layer.
Then remove the second layer of the strip.
Step 2: Do the same with the second layer.
The second layer was the hopes and dreams.
Formed when applying the second layer.
Energy is the second layer; it is deeper than matter.
Place the saci again on top of the baking pan to bake the second layer.
I can't break the second layer of encryption.
The second layer of putty should be applied after a couple of hours.
Then you can apply a second layer and also let it dry.
Apply second layer only when the first one has dried out completely.
It makes a guest appearance on the recording's second layer of ambient noise.
Next, apply the second layer, which has a decorative function.
If necessary we repeat 6-7 point,putting the second layer varnish gel.
Apply second layer of varnish and allow to dry for 2 to 3 days.
The thing is, I would prefer to have a second layer of defense, one that I control.
Put the second layer- it will be required to hold it less time- minutes 15.
In step 2 we will start(and perhaps we will finish as well)solving the second layer.
If needed, apply a second layer after the first has dried.
It is better to apply mascara with one layer, then wait and apply a second layer.
The primer is the second layer and is applied with a spatula or trowel.
The second layer of the secondary winding also includes 15 turns, the wire cross-section is 0.2 mm;
Our top notch sources:people who are actually working for them,- the Secret Service, the second layer people in the Bilderbergers,- the clerks, the administry office.
Step 3: Place a second layer of wax paper on it and gently stroke it.
To solve second layer we use two-coloured cubes that do not have the yellow colour.
When applying the second layer of whitewash roller begins to"pull" the previous layer; .
For the second layer lime wash is enough to give the first layer to dry out a bit.