Examples of using Two ends in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Types: Straight for two ends;
The two ends of the pipe are connected to the.
Max run length in 20m by two ends powered.
Hit the the two ends of frame to be flat;
When you look at it, you can see one of its small two ends.
The two ends are the thrust plate and the press head.
It is moisture-proof and insect-resistant Two ends have rubber stopper.
The two ends are the thrust plate and the press head.
The union is consist of 3 parts, two ends can be M/M thread, F/F thread, or M/F thread.
The two ends of the pipe are connected to the evaporator in the ground source heat pump.
A: If using frequently,best coating lubricant on the chain and two ends of the shaft every month.
A tunnel has two ends. This one's here, and the other one's.
HK-RS HK-2RS:Drawn cup needle roller bearings with open ends, two ends with seal ring.
(2) Connect two ends of power cable with adaptor and ion bar.
Barrel ReamerThe barrelreamer is a kind of drill bit whose two ends are cone-shapedand whose middle part is straight.
The two ends of a railway car are designated the A end and the B end. .
The barrel reamer is a kind of drill bit whose two ends are cone-shaped and whose middle part is straight.
The two ends of the prism may be rounded or capped with a pyramid, designed so that the die cannot rest on those faces.
Rail sleeper screw spike with two ends, fixes the rail together with the Nabla clip system.
The current method to branch wire from the cable trunk is to cut off the trunk line,and crimp two ends of trunk line and the required.
Secondly, Ready to test---put two ends of the electrolyser into two glasses, the plug 220-volt power supply.
Plastic bag to protect filterbody 2 Protective foam prevent the two ends of filter。 3 Palstic bag Protect box from moisture.
Double acting cylinders have two ends that are supplied with hydraulic fluid, which is used to retract and extend the piston.
If using frequently, best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
In this process, Internal and external surfaces, two ends appearance, bending degree, fixed length, outer diameter and.
A: If using frequently,best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
A: If using frequently,best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
The sugar“salami” is stretched by grabbing two ends and ply at half the salami on a hook fixed at the workbench base.
The rolling element ofcylindrical roller bearing is cylinder, the two ends of the external lines have the corrective slope which can eliminate the contact stress.
The middle section of the relaxation rod is a large-diameter and the two ends are pivoted on the wall section of the machine base to be a small-diameter stepped shaft.