Examples of using Two ends in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Two ends cover with caps.
Types: Straight for two ends;
The two ends are the thrust plate and the press head.
Max run length in 20m by two ends powered.
The two ends are the thrust plate and the press head.
Use the coupler to link the two ends of rebar.
The cables at two ends are connected in the direct splice area.
It is moisture-proof and insect-resistant Two ends have rubber stopper.
Two ends have rubber stopper, avoid the damage in transit.
Abutting joint two ends of rebar with coupler.
Annealing 200T press machine 2 Surface crack, stratification for two ends.
PP cloth with plastic caps at two ends of the roll; 5m length.
Pipe Ends: Two ends of the Beveled Ends. Plastic caps(small OD), Iron protector(large OD), Pipe ends with steel support for thin wall.
You are going to light these two ends while I light this end. .
Double acting cylinders have two ends that are supplied with hydraulic fluid, which is used to retract and extend the piston.
X, the Y-axis USES the Japanese black field high ground wire rod, the two ends Japan matsushita motor drive.
The union is consist of 3 parts, two ends can be M/M thread, F/F thread, or M/F thread.
Beveled end, plain end, varnished, or adding plastic caps to protect the two ends as per customer's requirements.
Sealed devices are installed at the two ends of mixing shaft to prevent the leakage of materials.
Beveled end, plain end, varnished, or adding plastic caps to protect the two ends as per customer's requirements.
It is moisture-proof and insect-resistant Two ends have rubber stopper, avoid the damage in transit.
Covered with PP cloth and plastic caps at two ends of the roll, color labels or shipping marks.
The barrel reamer is a kind of drill bit whose two ends are cone-shaped and whose middle part is straight.
Shaft: end face milling, middle hole drilling of two ends, beveling, grooving(two ends), hole drilling.
In this process, Internal and external surfaces, two ends appearance, bending degree, fixed length, outer diameter and.
Packing in rolls with PP cloth and plastic plugs at the two ends which could protect grass when shipping and easy to stock;
Or the difference in the rotational speed between the two ends is checked, if the difference is obvious Should be replaced with a motor.
If using frequently, best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
A: If using frequently, best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
When the lamp is aging, the illumination is unstable, and the two ends are black, please replace it in time, otherwise it will affect the effect.