Examples of using Initial temperature in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Initial temperature of the egg.
Coker feed initial temperature.
Initial Temperature: 60±3℃.
Change in temperature= Final temperature- Initial temperature.
Initial temperature for the water.
It has six segments: pre-heating and pre-pressing, initial temperature and press holding, heating and pressuring.
No initial temperature was recorded.
Warm tip: Winter has come,and low ambient temperature will lead to low initial temperature of water chiller.
Output from the sensor includes the initial temperature, temperature rise, and final temperature distributions.
Initial temperature of press parts, position of mold side cooling pipe, number of pieces, setting of heat absorption amount.
The comparison between the data and theory calculations indicates that the initial temperature of 300 MeV to 600 MeV is achieved.
Θ0: Initial temperature(°C) of the polymer.
This System restrains the temperature variation, caused by variation of input power voltage,moisture content and initial temperature of resin.
The initial temperatures were therefore probably a little higher.
Computed initial temperature distribution for a human showing the effects of metabolic processes.
For 1% of the nuclei to have enough energy to start the reaction,we need therefore, an initial temperature of at least 40 millions of degrees Kelvin.
Input size of the egg, initial temperature of the egg, the altitude you boil, then you can calculate how much you should boil to get boiled egg you want.
The initial temperature of the steam was assumed to be 100° C. The initial temperature of the cooling water was assumed to be 0° C. The mass of steam and coolant is assumed to be the same.
All parameters, such as the initial temperature of each cell and the geometric battery topology, can be set with an intuitive graphical parameterization in ModelDesk.
Say the initial temperature is 20 deg C, raising the temperature to 60 deg C will increase coil resistance and loss, prompting the synergetic effect of reducing output and efficiency as the magnet weakens and causes the torque constant to drop.
According to another legend, the initial temperature of hot spring Yongning high Gunfei pig hot spring water can be hot chicken, later, the temperature gradually decreased, and now the water temperature has been the most appropriate body wash bath.
Initial Melting Temperature:.
Initial opening temperature: 70±3℃.
The ratio of flour and water should be 1: 3,and the water temperature- so that the initial welding temperature was 63-65° C.
High initial decomposition temperature increase the safety of production.
Real cycling starts with the actual initial tool temperature and realistically simulates the entire ramp-up process.
