ta prov ytbehandlar
provets yta
tar prov ytbehandlar
(G15) described a sample surface.
(G15) beskrev en provyta.CCM allows the user to measure variations of thermal conductivity on a sample surface.
CCM låter användaren mäta variationer av termisk conductivity på en ta prov ytbehandlar.The interactions between the tip and sample surface are measured by monitoring the displacement of the free end of the attached cantilever.
Växelverkan mellan spetsen och tar prov ytbehandlar mätas, genom att övervaka förskjutningen av det fritt, avslutar av den fäste cantileveren.EFM maps locally charged domains on the sample surface.
EFM kartlägger lokalt laddade områden på ta prov ytbehandlar.EFM maps locally charged domains on the sample surface, similar to how MFM plots the magnetic domains of the sample surface.
EFM kartlägger lokalt laddade områden på ta prov ytbehandlar, liknande till hur MFM konspirerar de magnetiska områdena av ta prov ytbehandlar.Gloss effects are based on the interaction of light with the physical properties of the sample surface.
Glanseffekter baseras på samspelet mellan ljus och de fysikaliska egenskaperna hos provytan.Now you can see exactly what occurs at the sample surface during a measurement.
Nu kan du se exakt vad som sker vid provets yta under en mätning.the scanning speed is limited by the time it takes for the tip to reach thermal equilibrium with the sample surface.
rusar scanningen begränsas vid tiden som den tar för att spetsen ska ne termisk equilibrium med ta prov ytbehandlar.This provides a view of the topography of the sample surface by way of reflection.
Detta ger en beskåda av topografin av ta prov ytbehandlar vid långt av reflexion.The work illustrated how to overcome sample preparation through immobilization of both components of the aptamer to the AFM probe and the sample surface.
Arbetet illustrerade hur man kan övervinna provberedning genom immobilisering av såväl komponenter i aptamer till AFM sonden och provets yta.SPM measurements of macroscopic areas by moving of the scanning area over sample surface with the help of the positioning system.
SPM-mätningar av macroscopic områden vid flyttning av det avläsande området över tar prov ytbehandlar med hjälpen av positioneringsystemet.image clarity of sample surfaces.
att avbilda klarhet av ta prov ytbehandlar.The SThM technique of the XE-series maps the thermal properties of the sample surface by using a nanofabricated thermal probe with a resistive element.
Den SThM tekniken av XE-serierna kartlägger den termiska rekvisitan av ta prov ytbehandlar, genom att använda en nanofabricated termisk sond med en som gör motstånd beståndsdel.only pounding small particles out of the sample surface.
slår små partiklar ut ur ytan på provet.Currently, in Sweden, it is one of only two ways to analyse molecules on sample surfaces without first placing the samples in a vacuum, says Ingela Lanekoff.
Idag är det en av endast två tekniker i Sverige som kan göra analyser av molekyler på provytor utan att provet först måste föras in i ett vakuum, säger Ingela Lanekoff.Using a polishing surface with high resilience will result in material removal from both the sample surface and the sides.
Vid användning av en polerduk med hög elasticitet avverkas material från både provytan och runt kanterna av provet.While the distance between the probe tip and sample surface is controlled by usual AFM scheme,
Fördriva distansera mellan sondspetsen och ta prov ytbehandlar kontrolleras av vanlig AFM-intrig, den termiska sondenAutomation enables repetitive impacts at the same position on the sample surface with a set frequency.
Automation möjliggör upprepande får effekt på samma placerar på ta prov ytbehandlar med en fastställd frekvens.A sharp physical probe scans the sample surface and sends the data gathered to a computer that generates a high resolution image of the sample surface, which can be visualized by the user.
En korläkarundersökningsond avläser ta prov ytbehandlar och överför de samlade datan till en dator som frambringar en kickupplösning avbildar av ta prov ytbehandlar, som kan visualiseras av användaren.particles are torn out of the sample surface during abrasion.
partiklar som har rivits ut ur provytan under slipningen.For example, when the tip is in contact with a concaved area of sample surface, the tip-sample contact stiffness would increase comparing to the case when the tip is in contact with a flat area of sample surface..
Till exempel när spetsen är i kontakt med ett görat konkav område av, ta prov ytbehandlar, skulle förhöjningen för denta prov kontakten som den styvhet jämför till fallet, när spetsen är i kontakt med ett lägenhetområde av tar prov ytbehandlar..This so-called Near-field Optical Microscopy delivers optical information from sample surfaces with sub-wavelength resolution.
Denna så kallade närområdet optisk mikroskopi levererar optiska informationen från prov ytor med sub-våglängd upplösning.we usually have a dozen test sample surface.
vi har oftast ett dussin testa prov yta.A preparation method is a series of steps in which material is removed mechanically from the sample surface by means of successively finer abrasives.
Preparationsmetoder En preparationsmetod är en serie steg där material avverkas mekaniskt från provets yta med hjälp av gradvis finare slipmaterial.However, it is the ability to measure forces as indicated by the deflection of the AFM cantilever that has put it into prominence in surveying mechanical properties of biological sample surfaces.
Emellertid är det kapaciteten att mäta styrkor, som indikerat av avböjningen av AFM-cantileveren, som har satt den in i prominens, i granskning av mekanisk rekvisita av biologiskt, ta prov ytbehandlar.of the XE-series maps electric properties on a sample surface by measuring the electrostatic force between the surface
av XE-serierna kartlägger elektrisk rekvisita på en ta prov ytbehandlar, genom att mäta den elektrostatiska styrkan mellan ytbehandlamaximum exposure of the sample surfaces for the extraction.
maximal exponering av provet ytor för utvinning.imaging the optical slice corresponding to the sample surface with LSCM means that, if the two techniques can be combined then labelling in the LCSM image can be cross correlated to structures imaged with AFM.
att avbilda den optiska skivan som motsvarar till ta prov, ytbehandlar med LSCM-hjälpmedel som, om de två teknikerna kan vara kombinerat märka därefter i LCSMEN avbilda kan vara korrelerat argt till strukturerar avbildat med AFM.probe of inert gas ions with a small interaction volume at the sample surface enables highly precise induction chemistries.
sond av inert gasar joner med en liten växelverkanvolym på ta prov ytbehandlar möjliggör preciserar högt induktionskemiar.wet after cleaning should be placed filled with measurements evacuated degassing cup with distilled water until the sample surface light bubbles
våt efter rengöring ska placeras fylld med mätningar evakuerade avgas kopp med destillerat vatten tills provytan lätta bubblor
Results: 30,
Time: 0.0508
After 5 min, the sample surface showed significant hydrophilicity (Fig. 4a).
These modes offer vast data regarding the sample surface physical properties.
The sample surface is coated with a thin layer of resist.
The sample surface must be extremely clean for effective RHEED experiments.
On the sample surface four distinct green agglomerates can be identified.
The pulsed radiation on the sample surface produces modulated secondary electrons.
It may be appropriate to sample surface water, groundwater, and sediments.
The microstructure of sample surface is observed by secondary electron imaging.
Concrete sample surface roughness was not systematically investigated in this study.
A wire on the sample surface serves as the mw source.
Show more
Fäst cantileverspetsen på provytan så att den bildar cohesin/dockerin-paret.
Obs: Rekommenderad provytan är en porslin plats platta.
Provytan förses med lysimetrar och observationsrör.
Det är viktigt att bibehålla en konsekvent avstånd mellan sonden och provets yta vid mätning.
Detaljerat resultat med profiler från provytan barrskog Bilaga 7.
Medelavvikelse och standardavvikelse för varje profil i provytan lövskog.
Låg reflektans på glasskivan skyddar provytan mot desorientering.
Medelavvikelse och standardavvikelse för varje profil i provytan gräs.
Detaljerat resultat med profiler från provytan asfalt Bilaga 5.
Provytan var lika med panelens framsida.