Examples of using Working fluid in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Temperature of the working fluid, ᵒS.
Working fluid is consumed at a rate of 2 liters per 100 square meters.
Refrigerant R-134a is used as working fluid.
Process 1-2: The working fluid is pumped from low to high pressure.
Specified the recommended lubricants and working fluids.
One has a working fluid, water and ammonia,
This paper describes the transcritical refrigeration cycle utilizing CO2 as working fluid.
To make the working fluid, the spray tank is poured into a quarter with water.
The primary circuit may utilize Propane as the working fluid and Co2 as the secondary fluid. .
The working fluid in a Rankine cycle follows a closed loop
The heat is supplied externally to a closed loop, which usually uses water as the working fluid.
The working fluid is prepared exactly in the sprayer itself,
other potential working fluids.
Working fluid first through the annular flow,
giving its heat to the working fluid, and then output through the chimney.
The use of canal water as a working fluid in the hydraulic system and the immersion of the pistons in the wet dock at
This device enables a liquid's density to be measured accurately by reference to an appropriate working fluid, such as water
recommended lubricants and working fluids.
Two Phase Heat Transfer Systems- with natural refrigerants such as propane used as the working fluid to transfer heat
recommended lubricants and working fluids.
drainage submersible pump, Working fluid first through the annular flow,
In the CPC, single particles larger than 2 nm are grown to micrometer size by means of condensation of a working fluid(alcohol or water) on the particles.
This paper describes the transcritical refrigeration cycle utilizing CO2 as working fluid which is composed with Gas cooler,
recommended lubricants and working fluids.
This paper describes the transcritical refrigeration cycle utilizing CO2 as working fluid which is composed with Gas cooler,
lists the recommended lubricants and working fluids.
a thermal device in which fuel is oxidised in order to heat the working fluid, and a turbine; this includes both open cycle and combined cycle gas turbines,
a thermal device in which fuel is oxidised in order to heat the working fluid, and a turbine;
recommended lubricants and working fluids used in the Toyota Land Cruiser 100.
specify the required tightening torques of threaded connections, the working fluids and their volumes, data for the adjustment and control.