Examples of using External thread in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
External thread ends.
Size: G1/2" external thread.
External thread is easy to install.
Size: G1/2" external thread.
External thread interface size: G3/4.
Unlimited size for external thread.
Self tapping external thread m12 x 1.5 thread insert.
Self tapping external thread m12 x 1.5 thread insert Contact Now.
Type: external thread, internal thread, one point, three points.
Diameter measurement of external thread pitch(mm).
A fastener consisting of a head and a screw rod(cylindrical body with external thread).
Material of the external thread: Rubber mast.
External thread, thread size W21.8mm × 1/ 14 of inch thread connector.
Adjustable cable gripper with external thread, fixed to the bracket;
External thread length ¨H¨, bolts and other parts are fixed together, the replacement must use the same quality grade bolts.
FF06 1/2"AA(miniplus) external thread connection½",«American» complete.
Bolt is a kind of inside and outside has a screw thread, external thread on four root.
The main body of this product is the external thread, and it includes a compression ring and union nut.
Bolt is a kind of inside and outside has a screw thread, external thread on four root.
The corresponding connection of the length of the external thread can not be bigger than the length of the internal threaded of the indicator, generally not more than 16mm, to prevent external thread and the spool of the flow indicator collided, to effect of the use.
Internal Thread- Class UNC 2B/ External Thread- Class UNC 2A.
Both threads are parallel andsealing is affected by compression of a soft material onto the external thread, or a flat gasket.
Fits all standard taps with M22 external thread and internal thread M24- gasket included.
(5) Thread: The minimum Machinable M2 internal thread, the accuracy of GB-7h, the external thread size is not limited, the accuracy is GB-6g.
A type of fastener consisting of a head and a screw(with an external thread) is required to fit the nut for fastening the connection of two parts with through holes.
Piece"a small part" is inserted into the"large part" so that the external thread has entered into an internal thread. .
Internal thread can be tapping with screw tap, external thread can be polished, but not allowed to bear overload.
Adjustable cable gripper with external thread, fixed to the bracket;