Examples of using Outer surface in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The dust is blocked on the outer surface of the filter bag.
Outer surface of the light Titanium filter through special processing.
Tight tolerance: we can grind and polish the outer surface and length.
The visible outer surface of the Sun is called the photosphere.
Inner face employs different materials from the outer surface. Generally smooth and.
Lubricate the outer surface of the sliding bearing prior to installation.
Ultrasonic washing can remove the adherent matter inside the bottle and outer surface of bottle.
Away from any device outer surface of 5cm, the ray irradiation leak rate.
In pulse and air box type pulse precipitator,dust is attached to the outer surface of the filter bag.
Away from any device outer surface of 5cm, the ray irradiation leak rate.
In pulse and air box type pulse precipitator[1],dust is attached to the outer surface of the filter bag.
Unistrut in UK Lastly, outer surface by means of hot-dip galvanizing, el….
When the outer surface of the train is wiped with the white cotton cloth, there is no.
Space can now be understood as its outer surface, time as an inner surface. .
The outer surface is plastic coated, it is strong and resistant to any powders non-corrosive or corrosive.
In the load of the filter material,all the dust is blocked on the outer surface of the membrane, and all of them are removed after cleaning.
The entire outer surface, coating pan, spraying gun and all visible surface is made of stainless steel.
Advanced tip design, made of kink resistant and biocompatible FEP,with extremely smooth inner and outer surface to ensure easy vein puncture with minimum trauma.
The inset cups on the outer surface help grip and paddle your way through the water as you spin the globe.
Inner chamber material is SUS 304 stainless steel, graceful appearance,circularly shaped body, outer surface treated with powder coated, corrosion and water resistance.
The outer surface and the material contact part are made of high quality stainless steel, handsome in appearance, maintenance, easy to clean.
For specific applications, steel fittings are either coated on the outer surface or internally lined or clad(see the example of an overlay clad tee below).
The outer surface of the main body is covered with aluminum silicate insulation material, and the outer 304 stainless steel plate is used as a heat preservation cover, and the surface temperature does not exceed 50° C;
AUTOBASE Tunnel car washing machine is made by taking the AUTOBASE new technology design,it clean the outer surface of the tire professionally, cleaning with excellent results and strong job stability, etc.
During assembly, the outer surface of the shaft sleeve can be appropriately coated with lubricating oil to help the shaft sleeve to install more easily, but not too much to avoid the shaft sleeve will be detached in heavy load or reciprocating movement.
Material: large panel plate is a laminate or sandwich structure, inside and outside the skin for the aluminum or glass steel plate, the internal buried plate can be 6mm stainless steel plate, carbon steel plate, the filler can be polyurethane foam, EPS foam or XPS foam,glass or aluminum outer surface is usually attached A layer of protective film;
After the hydraulic pressure test, the water inside the workpiece is drained,then the outer surface of the workpiece is dried by compressed air, and then the inner part of the workpiece is blown by the compressed air to ensure that there is no water accumulated in the header.
With the continuous filtration work, the dust attached to the outer surface of the filter is increasing, the running resistance of the dust collector increases, the conversion valve of a filter unit is closed, the filter unit stops working, the reverse blow compressed air enters the filter unit, and the dust on the outer surface of the filter bag is blown away, and then the valve plate is switched on, the filter sheet is opened.
The end of branch pipe of weldedtee is machined into saddle groove, the outer surface of weld is polished into smooth transition, the inner hole edge of main pipe is polished into round corner whose radius is equal or over 8mm, and the weld is 100% RT+100% UT+100% MT before and after heat treatment.