Examples of using Sub-assemblies in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Requirements for components and sub-assemblies.
Electrical/electronic sub-assemblies are not required to be type-approved in accordance with UNECE Regulation No 10.
Indication of the direction of flow 7. Sub-assemblies.
The provisions for sub-assemblies may apply to sub-assemblies manufactured by the same or different manufacturers.
Conditions for compatibility with interfaces, sub-assemblies or measuring instruments.
Sub-assemblies and measuring instruments may be assessed independently and separately for the purpose of establishing conformity.
Conditions for compatibility with interfaces, sub-assemblies or measuring instruments.
If sub-assemblies are traded separately and independently of an instrument, the exercise of conformity assessment should be undertaken independently of the instrument concerned.
At the receive end, Receiver Optical Sub-Assemblies(ROSAs) with TO packaging are used.
The manufacturer shall indicate the conditions for compatibility with interfaces and sub-assemblies, where relevant.
Where a heat meter consists of sub-assemblies, the essential requirements for the heat meter apply to the sub-assemblies as relevant.
Conceptual design and manufacturing drawings andschemes of components, sub-assemblies, circuits, etc.;
Where a thermal energy meter consists of sub-assemblies, the essential requirements for the thermal energy meter apply to the sub-assemblies as relevant.
Conceptual design andmanufacturing drawings and schemes of components, sub-assemblies, circuits, etc.;
When a measuring instrument consists of a set of devices, not being sub-assemblies, operating together, the markings shall be affixed on the instrument's main device.
Design and manufacturing drawings andschemes of the PPE and of its components, sub-assemblies, and circuits;
Lockheed Martin will build the radar components and sub-assemblies for the 17 systems, while UTI Systems will provide additional components and work on radar integration and testing.
Where appropriate, priority should be given to preparing for re-use of WEEE and its components, sub-assemblies and consumables.
Fittings' means safety devices, controlling devices orregulating devices and sub-assemblies thereof, separately marketed for trade use and designed to be incorporated into an appliance burning gaseous fuels or to be assembled to constitute such an appliance;
In the case of a sub-assembly, all necessary information to ensure the compatibility with other sub-assemblies or measuring instruments.
The manufacturers, which are responsible for the design and manufacturing of safe railway vehicles, parts,components or sub-assemblies of vehicle, railway infrastructure, energy and track side control command, as well as issuing of the preliminary maintenance documentation associated to the vehicle.
For the purposes of calculating collection rates, a common methodology for the calculation of weight of EEE should be developed to ascertain, inter alia, whether this term includes the actual weight of the entire equipment in the form in which it is marketed,including all components, sub-assemblies, accessories and consumables but excluding packaging, batteries, instructions for use and manuals.
Our fields of interest are the medium serial production of parts, sub-assemblies, or assemblies within the scope of the production program.
Used passenger 747-400 aircraft have been converted into an outsize,"Large Cargo Freighter"(LCF)configuration to ferry sub-assemblies to Everett, Washington for final assembly.
Confirmation that there has been no modification to the approved type as referred to in point 7.2, including materials,sub-components or sub-assemblies, nor to the relevant harmonised standards or other technical specifications applied;(c).
Sub-assembly' means a hardware device, mentioned as such in the instrument-specific annexes, that functions independently and makes up a measuring instrument together with other sub-assemblies with which it is compatible, or with a measuring instrument with which it is compatible;
Sub-assembly of titanium, so light as stresses will allow.
Develop all assembly and sub-assembly drawings.
The critical change value for a sub-assembly of a thermal energy meter is equal to the respective absolute value of the MPE applicable to the sub-assembly see points 7.1, 7.2 or 7.3.
The critical change value for a sub-assembly of a thermal energy meter is equal to the respective absolute value of the MPE applicable to the sub-assembly(see points 7.1, 7.2 or 7.3).