Examples of using Test sample in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Okay, we got the test sample! Clear!
Repeat this charging method with another portion of the test sample.
Place the test sample in a 400 millilitre beaker.
Clear!- Okay, we got the test sample!
Place the test sample in a 500 millilitre flask 5.1.
Procedure A: one determination per test sample.
Place the test sample in a 600 millilitre beaker. 7.2. Preparation of the solution.
Procedure A: one determination per test sample.
For a test sample of one gram multiply the volume of the final dilution(v4) by five.
Calculate the percentage of a-cyclodextrin in the test sample as follows.
Principle The test sample is sieved on a nest of three sieves, either by hand or by mechanical means.
GB SD card contains software, test sample files and user manual.
Perform a blank test under the same conditions,omitting only the test sample.
Put each test sample of 70( 5) grams into an Erlenmeyer flask which is then sealed with a stopper.
Install cable test hole,electricity test sample for test. .
After being subjected to two thermal cycles, the test sample is held at a temperature of 20(±3)°C for the determination of the oil retention value.
Install cable test hole,electricity test sample for test. .
After being subjected to two thermal cycles, the test sample is held at a temperature of 20±3 °C for the determination of the oil retention value.
The reject device should then be observed to successfully reject the test sample.
To find your nearest metal detection test sample representative click here.
Procedure B: the result shall correspond to the mean value of two determinations per test sample.
Position to meet large sample demand, test sample can be carried out at any time.
The voltage meter on the control box directly displays the voltage value added to the load test sample.
This means you can be sure that every test sample is accurate, consistent and fit for purpose.
Mechanical sieve shaker(if available) capable of imparting both vertical andhorizontal motion to the test sample.
Position to meet large sample demand, test sample can be carried out at any time.
Prepare a blank solution by repeating the whole procedure from the extraction stage,omitting only the test sample of fertiliser.
Positions to meet large sample demand, test sample can be carried out at any time.
Prepare a blank solution by repeating the whole procedure from the extraction stage,omitting only the test sample of fertiliser.
Ensure essential close contact between explosive and test sample by adding or removing small quantities of sample. .