Examples of using Potential difference in English and their translations into Spanish
{-}
-
Colloquial
-
Official
We would expect the maximum potential difference point here.
A potential difference to exist requires two references.
Lightening is formed due to large potential difference.
Volt- Unit of potential difference or electromotive force.
Voltmeter An instrument for measuring potential difference.
Measurement of potential difference between electrical items.
Volts= The volt is the unit of the electric potential difference(voltage).
The DMSB noted a potential difference in OS during safety review.
The forward voltage from the galvanic isolator is higher than the potential difference between metals.
Potential difference Potential energy Water potential. .
Voltage is nothing but potential difference between two points.
The potential difference achieved by modern Van de Graaff generators can be as much as 5 megavolts.
Flow of electrons is caused due to potential difference between two points.
The total potential difference represents the extraction voltage for the beam.
Electricity is generated due to electric potential difference between two electrodes.
At low potential differences-up to 4.9 volts-the current through the tube increased steadily with increasing potential difference.
An electric generator is capable of maintaining electrical potential difference between two points….
Nowhere in the world is the potential difference between states greater than along the border of Mexico and the United States.
The difference in temperature between the hot seal andthe cold joint becomes a Potential Difference, thanks to the Seebeck effect.
These devices maintain an electrical potential difference between two points, and transform mechanical energy into electrical energy.
When light falls on the topsheet, communicate its energy photons to electrons, andtheir reactions are those that create a potential difference between the weak and strong blades diodes.
The phenomenon to avoid is the electric potential difference between user and environment that is triggered during contact, what we colloquially call getting a‘shock.
This is possible only where the line voltage is the lower of the two voltages given on the plate the line voltage is the potential difference between two of the three conductors R, S and T.
By applying a potential difference between the negatively charged cathode wires and the positively charged metal anode, the metal from the anode dissolves and simultaneously on the wires the metal deposits and forms the coating.
This indication technique involves the measurement of the potential difference between two metal electrodes that are polarized by a small current.
From this, we try to reconstruct the density of channels through which this exchange of calcium, chloride andother chemicals occurred, that generated this potential difference.
During the formation of a cumulonimbus,there is an increase of ionisation and a potential difference is generated between the thunder cloud and the ground, which gives rise to small discharges.
An electric potential difference is created between the electrodes that causes a charge and the appropriate counter ion from the electrolyte to enter the polymer in the form of electron addition(i.e., n-doping) or removal i.e., p-doping.
On a boat orother watercraft, alternator noise or ground loop noise is usually a voltage potential difference, and it can happen on either the positive or the ground side of the power wiring.
While the RS-232 using a voltage in relation to the Earth,the RS-422 carries its own cable to measure the potential difference, this difference allows wired up to 1200 meters front the 50 or 60 of the former.