Приклади вживання Is bent Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
His body is bent.
It is bent and folded 90°(Photo 1).
The other leg is bent.
Its end is bent and slightly raspushivaetsya.
The sleeve cuffis too raised when the arm is bent.
Know, Why lever is bent, like tail?
Is bent tube at an angle 45 degrees, as it shown on the picture.
You should get a tangle of thread, which is bent from two sides.
If the stalk is bent more than about 45-degrees, it snaps apart.
Indeed, they have six legs, each of which is bent at seven"joints".
The piece is bent in half, fastened with adhesive tape in the right place.
This cord gets damaged easily especially if it is bent or coiled constantly.
Tracheostomy tube is bent to the right, reinforcing, does not transmit sunlight.
Diamond has a high index of refraction, so light is bent and dispersed within a diamond.
In the event that it is bent and deformed, repair of the jack can be considered inappropriate.
The simplest option tree shapingis considered to be a tree whose trunk is bent zigzag.
Not yet processed part of the material is bent, and glue is applied to the floor.
The front leg is bent to the right angle, the back leg is straight, the heel is pressed to the floor.
For this, galvanized wire is used, which is bent at the ends in the form of staples.
The river is bent abruptly in one area forming a meander in the middle of which this unique town is located.
Elastic structure to prevent the battery andelectronic components from being damaged when the board is bent;
Each of the modules afterwards is bent accordingly, so that the spider looks more realistic.
There were four more models presented together with the flagship model, one of which is bent in half, like a sheet of paper.
The trunk of a hornbeam tree is bent during growth, and therefore it becomes unusable for construction.
Sometimes gravitational lensing can evenproduce multiple images of the object as light is bent in different directions around the foreground cluster.
Profile is bent in accordance with the side portions, made before, and attached using dowels and screws.
Elastic structure to prevent the battery andelectronic components from being damaged when the board is bent; 2. Dual Brushless Hub-Motors; 3.
Faithful ally who is bent on meddling in a country in which you are deeply interested- you have three courses open to you.
The bound square is bent in half, the heater is laid inside and insulated with the resulting angle into one of the corners of the rug so that it forms a hood.