What is the translation of " FORMWORK " in Chinese?

• 模板

Examples of using Formwork in English and their translations into Chinese

The Aluminium Formwork Manufacturer.
铝合金压铸制造商。

From this point of view, the cost, efficiency and quality of the project will be directly affected by the formwork technology.
从这个角度来看，项目的成本，效率和质量将直接受到模板技术的影响。

Jiangsu Lianggong formwork Co Ltd.
江苏良工建筑模板有限公司.

The aluminum formwork replaces the traditional formwork, square wood, and steel pipe, which is equivalent to the formwork and support system.
铝模板替代了传统的模板，方木和钢筋，相当于模板+支撑系统。

Jiangsu Liang Gong Formwork Co Ltd.
江苏良工建筑模板有限公司allrightreserved.

Formwork construction is an important part of modern architecture, which determines the quality of the building and its overall stability.
建筑模板建筑是现代建筑的重要组成部分，它决定了建筑的质量及其整体稳定性。

The salary of individual trades, such as bricklaying and metal formwork has dropped and is affecting the livelihood of workers.
砌砖和安装金属模板等一些工种的工资已经下降，影响了工人的生计。

The entire house is constructed of steel and 3D printing technology, without a brick and without the need to dismantle the building formwork.
整栋房子采用钢结构和3D打印技术建造，没有用一块砖头，也无须拆卸建筑模板。

The importance of concrete forms is undoubted, but the choice of high-quality formwork is very important for better building quality.
建筑模板的重要性毋庸置疑，高质量模板的选择对于提高建筑质量至关重要。

Most aluminum formwork systems can reach a capacity of 60 kN per square meter, which can meet the bearing capacity requirements of most residential buildings.
多数铝模板体系承载力可达到每平方米60KN，足够满足多数住宅楼群的支模承载力要求。

As a special part of the concrete construction project, the building formwork has experienced a long period of development at home and abroad.
模板工程作为混凝土建筑工程中的必备工序，在国内外已有较长的发展过程。

Production awareness: laminated stamping, positioning is not in place, air blow guns are not used, cracks in the formwork continue production.
生产意识：叠片冲压，定位不到位，没使用吹气枪，模板有裂纹仍继续生产.

First of all, starting from the aluminum formwork, after all, the aluminum concrete forms is now hot, and there are many friends concerned.
首先，从铝模板开始，毕竟铝合金混凝土模板现在很热，并且有很多关注的朋友。

For the Smart Slab project, the researchers did not produce the building components themselves with 3D printing but rather the formwork- i.e. the mold.
对于SmartSlab项目，研究人员并未使用3D打印生产建筑构件，而是使用模板-即模具。

Wood plywood is the mainstream forms in the current formwork market, but this formwork has the characteristics of poor economy.
木胶合板是当前模板市场的主流形式，但这种模板具有经济性差的特点。

A variety of best selling specifications are 3*6feet, 4*8feet of plywood, particleboard, high and medium fiber board, faced board, construction formwork and block board.
各种最畅销的规格有3*6英尺，4*8英尺的胶合板，刨花板，高中纤板，面板，建筑模板和挡板。

The group developed a new software to create the formwork elements; the software is able to record and coordinate all parameters relevant to production.
该研究小组开发了一种新的软件来制作模板元素，它能够记录和协调与生产相关的所有参数。

Formwork technology directly affects the quality, cost and efficiency of engineering construction, so it is an important part of promoting the progress of building technology.
模板技术直接影响工程建设的质量、造价和效益，因此它是推动我国建筑技术进步的一个重要内容。

It is estimated that the annual average production scale of China's construction formwork industry will increase by about 15% from 2011 to 2012;
预计2011年-2012年我国建筑模板行业年均生产规模增速将在15%左右;

The final damaged plastic formwork can still be crushed again, re-processed into a new formwork, saving resources and meeting the requirements of“green industry”.
终损坏的塑料模板仍可以再次粉碎，重新加工成新模板，节省资源，符合绿色工业的要求。

The installation presents the first robotically 3D printed concrete stage, consisting of columns fabricated without formwork, and printed to their full height in 2.5 hours.
该装置是第一个机器人3D打印的混凝土装置，没有用模板制造的柱子组成，它能够在2.5小时内打印完高度。

The final damaged plastic formwork can still be crushed again, re-processed into a new formwork, saving resources and meeting the requirements of“green industry”.
损坏的塑料模板仍可以再次粉碎，重新加工成新模板，节省资源，符合“绿色工业”的要求。

For the fabrication of this skeleton, a submillimetre thin plastic formwork was 3d printed and cast in ultra-high-performance fibre-reinforced concrete.
为了制作这种骨架，一毫米薄的塑料模板被3D打印出来，然后再在超高性能的纤维增强混凝土中被铸造出来。

The final damaged plastic formwork can still be crushed again, re-processed into a new formwork, saving resources and meeting the requirements of“green industry”.
受损的塑料模板仍可再次粉碎，重新加工成新模板，从而节约资源，满足“绿色环保产业”的要求。

In construction engineering, wood-plastic products are mainly used in building formwork, which has many advantages and is an environment-friendly building formwork material.
在建筑工程中，塑木主要应用在浇筑混凝土的建筑模板中，有着诸多的优点，是一种环境友好型建筑模板材料。

The final damaged plastic formwork can still be crushed again, re-processed into a new formwork, saving resources and meeting the requirements of“green industry”.
最终损坏的塑料模板仍可以再次粉碎，重新加工成新的模板，节省资源，符合“绿色环保工业”的要求。

Such as: plastic pipes, plastic tiles, hollow plastic formwork, thermal insulation materials and other building material products, have replaced traditional materials well.
如：塑料管道、塑料瓦、中空塑料模板、保温材料等建材产品，已经很好地代替了传统材料。