Examples of using First layer in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The first layer is you.
The base is always put the first layer.
First layer from clipboard.
Auxiliary Winch pulling force(the first layer).
As first layer genuine leather.
Leather material: the first layer of cowhide.
The first layer of defense is your skin.
That being said, make sure you have positioned yourself onto the first layer and let's jump straight into it!
And the first layer is aseptic.
A small amount of Sheetrock putty should be collected on a wide spatula andwith a stretching motion from ceiling to floor apply the first layer.
Dries the first layer of minute 3, the second 7 min.
The first brushing paint thickness cant surpass 5mm,and dont execute the second layer brushing until the first layer become dry.
After the first layer of soil dries, you can apply another one.
Four pandavas followed the Abhimanyu closely butas soon as Abhimanyu breached the first layer, Jayadratha shut down the opening to block the entry of four Pandavas.
For the first layer suitable roller with a long nap, it will help evenly distribute the paint.
I think that's a great thing, a deep-cleanse laser-it just gets off the first layer of skin, so after summer, after the lotion and creams and makeup buildup, it's a nice reboot.
If the first layer is exactly straight, the next shuttering blocks can be placed dry in the dressing.
I think that's a great thing, a deep-cleanse laser-it just gets off the first layer of skin, so after summer, after the lotion and creams and makeup buildup, it's a nice reboot.
While the first layer of colonization(biofilms) are hugely important, it is often ignored in research.
If you do more than one layer, make sure to place it so that the jointsbetween the blocks in the second layer sit over the middle of the blocks in the first layer, just like in a brick wall.
At the end of this step, the first layer should be complete, with a solid color(in this case, white) at the bottom.
Because the deeper tissues respond well to products and their"wet ability" can be altered,it's thought that now scientists have the first layer of work done in the quest to figure out how to waterproof skin.
The first layer on top of transparent paper, specially impregnated with an admixture of aluminum oxide particles, protects the panel;
The extended-release form, Ambien CR, which has a first layer that dissolves quickly to help you fall asleep, and a second layer that dissolves slowly to help you stay asleep.
First layer of transparent PVDF+PMMA, Adding a pigment that reflects infrared rays reduces the absorption of heat by the monochromatic and wood grain film and reduces the temperature difference between the inside and outside of the substrate.
After applying the first layer, you must wait until it has completely dried and hardened- this usually happens after 1-2 days.
Through the first layer clockwise vortex blade, through the water mist up to second swirl vane counterclockwise, water spray and top-down, gas in every layer of vortex blade by water mist purification, and processing, processing of gas again after the last mist layer before discharge.
It will be India's first layer for cyber threat monitoring and all communication with government and private service providers will be monitored by it.
It will be India's first layer for cyber threat monitoring and all communication with the government as well as the private service providers will be monitored round the clock.
As you move from the first layer to the fourth, the degree of filtering of fine particles also increases, and finally it will take place a waterproof layer for reduce the accumulation of vapors on the face when you breathe. Besides this there is a kind of valve"in tip" to the mask to help the man breathe if there is an increase in vapors inside it.