Voorbeelden van het gebruik van An offset in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
You can also add an offset.
An offset of 0 would render the text on top of the line.
Backcut the job with an offset from the frontcut decals.
Sometimes there are doubts because the"preview" gives an offset.
Second option is an offset how much text is returned.
Mensen vertalen ook
The parameterisation enables the setting of the indication range and an offset.
but have an offset to the back of 35 mm.
There is an offset that must be taken into account for the adjustment.
Then, both addresses will be at an offset of m and m+1.
Choose an offset that has at least four leaves,
Sine wave with a top value apk and an offset from zero ao.
First option is an offset to define where the output of your text starts Default 0.
Suitable for our HOME-F system with an offset of 18mm for 40mm panelen.
you must specify the time zone as an offset.
The search API is paginated with an offset and a response size.
This shear has an offset and an ergonomic handle for relaxed working.
The Trivio Guide Zero Offset seatpost made of 6061 T6 aluminum has an offset of 0mm.
end indicates an offset from the end of the sequence.
Once an offset is set, tado° displays the measured temperature including the offset. .
The Westbourne turtleneck has a nice knit with two strips with an openwork pattern, an offset stitching.
You can also enter an offset to start the page count at a different number.
HOME-R system, with an offset of 18mm for 40mm panels.
Ping-of-death is given an offset of the last fragment for which is:
The address of a local variable within the stack could be expressed as an offset relative to%esp.
The noise from the environment appears as an offset on both input leads, making it a common-mode voltage signal.
The architects' main intervention was the angular spiral staircase created by an offset along the property boundary.
If you observe an offset in the imagery, you can correct for it by selecting the"New offset" item in the"Imagery" menu.
32-bit value from a CDATA table using an offset more efficiency than CREAD.
If the ephemeris uses an incorrect mass this would result in an offset in the location of the centre of mass