Примеры использования Threshold level на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Threshold level.
Set the battery threshold level.
Threshold level.
Signal audibility with different Threshold Level settings.
The threshold level is reviewed periodically.
Keywords: outsourcing, risks of outsourcing, threshold level of losses.
Adjust the Threshold Level to a faint audible hum.
Reduce the Sensitivity(page 23) and increase the Threshold Level page 25.
Adjust the Threshold Level to a faint, audible hum.
Press the Minus(-) or Plus(+)buttons to adjust the Threshold Level.
The Threshold level is well known and scientifically based.
If the soil conditions change the Threshold Level may need adjustment.
Gold Mode* Threshold Level is controlled separately to the other modes.
If the soil conditions change the Threshold Level may need adjustment.
Establish a threshold level in accordance with paragraph(2)(a) of this article;
Use the Settings button to navigate to Threshold Level in the Settings Menu.
The threshold level of the luminance when key signals are created from a key source.
Keywords: economic security, territorial system,region, threshold level.
Seven percent is the threshold level, but not starting mechanism,"- he said.
A long press of the Settings button will return you to the Threshold Level setting.
Concentrations above the threshold level(0.5- 0.1 ppm) will lead to ripening.
Unlike the first NAS, the other NAS devices cannot adjust the battery threshold level.
Now the threshold level is 40% of the subsistence level for the region -22636KZT.
If the soil conditions change, the Threshold Level may need further adjustment.
If the Threshold Level is too high, faint targets will be harder to hear above the Threshold‘hum.
At achievement of pressure below threshold level on отпускание contacts are disconnected.
If the Threshold Level is too high, faint targets will be harder to hear above the Threshold‘hum.
The Threshold is controlled by Threshold Level and Threshold Pitch.
Without the UPS's threshold level, power is suddenly cut off to the NAS, potentially causing the loss and corruption of data.
Use the Settings button to navigate to the Threshold Level setting in the Settings Menu.