Примери за използване на Cold engine на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
With cold engine.
Avoid driving around with a cold engine.
A cold engine will consume more fuel for the first 5 miles or so.
Revving A Cold Engine.
A cold engine uses much more fuel in the first five miles to warm up.
Хората също превеждат
Ripping a cold engine.
He quickly heats the liquid,which has the same effect on the cold engine.
To start a cold engine.
A cold engine can burn up to twice as much fuel as a warm engine. .
Helps to get a cold engine.
In cold engine and an ambient temperature of 20 ºC the sensor resistance is between 2000Ω and 3000Ω.
Starting with cold engine.
When starting a cold engine, always close the choke valve by pulling the regulator towards you.
Starting with a cold engine.
This is because a cold engine uses more fuel in the first 5 miles.
Checking with a cold engine.
According to them, when the cold engine, especially at high load, sharply accelerated component wear.
You can't gun a cold engine.
We all know that the cold engine in the car does not work perfectly well, which we can observe in the winter.
Avoid driving around with a cold engine.
For most modern cars, idling a cold engine is each counterproductive and wasteful.
Don't accelerate hard with a cold engine.
Accelerating with a cold engine can cause premature engine failure.
Tip 1: How to start a cold engine.
The cold engine does not work fully, we can observe it especially in winter with compression ignition engines. .
It's safe to start the journey with a cold engine, and you will save on fuel.
Weak batteries may not crank the starter motor long enough orfast enough to push the cold engine to start.
Performing a compression test on a cold engine will produce inaccurate results.
This facilitates the ignition of ignition in the fuel mixture and the reduction of the spark power,which is especially noticeable when the cold engine is started in winter.
If you perform the compression test on a cold engine, the results will not be accurate.