What is the translation of " CURING PROCESS " in Chinese?

• 固化过程
• 固化流程

Examples of using Curing process in English and their translations into Chinese

There were various restrictions on the heating/curing process.
加热/固化过程有各种限制。

Therefore, the curing process is also the maximum softening treatment.
所以，固溶化处理也是最大程度的软化处理。

They must all go through the same fermentation or curing process before being consumed.
它们必须在食用前经历相同的发酵或固化过程。

The curing process of the glass glue is developed from the surface inward.
玻璃胶的固化过程从表面发展到内部。

The shrinkage rate in the whole curing process is very low, generally less than 2%.
在整个固化过程中显示出的收缩率很低，一般小于2%。

Increasing the temperature and humidity of the environment can accelerate the curing process.
提高环境的温度和湿度，都能使硫化过程加快。

After the curing process, you can simply rehydrate the meat before consumption.
在固化过程之后，您可以在食用前简单地对肉进行再水化。

However, typically only about 20% of the spectrum is useful for UV curing processes.
但是，通常只有约20％的光谱对于紫外线光固化工艺过程来说是有用的。

The UV curing process has been in use in the printing industry for more than thirty years.
UV固化工艺已经在印刷行业应用超过30年了。

In addition, the current project uses selected additives that make the curing process faster and more flexible.
此外，当前项目采用了精选的添加剂，使固化流程更快、更灵活。

During the curing process, the meat is usually soaked in a mixture of salts, nitrates, and even sugar at times.
在腌制过程中，肉通常浸泡在盐、硝酸盐、甚至有时是糖的混合物中。

After balancing electric vehicle battery discharge began curing process, in 12 hours started, there is a clear cure..
电池放电开始后固化过程，在12小时内开始，有一个明确的治疗方法。

However, during the curing process they could combust if the right conditions prevailed- namely, if oxygen were introduced.
然而，在固化过程中，材料会燃烧，如果“条件符合“-即，如果接触到氧气。

The concrete mix of precast elements contains a lot of water already so we only need to add heat for the curing process.
混凝土预制构件的水泥配合比已经含有大量的水份，所以我们只需要为养护过程添加热量。

Prior to the introduction of refrigeration, the curing process was used to preserve all kinds of meat in South Africa.
在冰箱引入南非之前，人们依靠比尔通这种腌肉方法来保存各种肉类。

For a wrong understanding of organizational boundaries or organization of cloud, this kind of organization is not the curing process.
对于无边界组织或云组织的一个错误理解是，这类组织是没有固化流程的。

Summary Bacon is made from pork and goes through a curing process where it is soaked in salt, nitrates and other ingredients.
培根是由猪肉制成，经过腌制过程，浸泡在盐、硝酸盐和其他成分中。

There are some measures that could individually reduce the number of carcinogens in smoke: modifying the blend of tobacco; refining the curing process;
这里有一些可以减少烟中致癌物的措施:减少香烟中的混合物；改善加工过程；.

Bacon typically goes through a curing process, during which the meat is soaked in a solution of salt, nitrates and sometimes sugar.
培根通常要经过一个腌制过程,在这个过程中,肉会被盐、硝酸盐,有时还会被糖浸泡。

In unsaturated polyester(UP) resins, the use of natural fibers has been difficult because the water content in the fibers deteriorates the curing process.
在不饱和聚酯(UP)树脂中，使用天然纤维很困难，因为纤维中的水含量会影响固化过程。

WayKen stereolithography(SLA) is a UV based curing process, and selective laser sintering(SLS) uses a carbon dioxide laser.
WayKen立体光刻(SLA)是一种UV光固化工艺，而选择性激光烧结(SLS)则使用二氧化碳激光。

The curing process initiates the nitrogen cycle and typically can take 1 to 4 weeks depending on the type of rock and method of curing used.
固化过程启动氮循环，通常可以使1达到4周，具体取决于岩石的类型和使用的固化方法。

The arrangement and orientation of the molecules during the curing process of the printed films can be determined from changes in the scattering pattern.
分子在印刷薄膜固化过程中的安排与方向，可以从扩散模式的变化来决定。

(4) the light curing process adopted by UV paint is free from pollution while painting, and is recognized as a green environmental protection product;
UV漆所采用的光固化工艺在淋刷油漆时无污染，是公认的绿色环保产品.

So using UV LED light source can significantly reduce the heat generated by the curing process, appearance will not damage the substrate base material.
所以采用UVLED光源能显著降低固化过程产生的热量，不会破坏承印基材外观。

Researchers found that the curing process and properties depended on exposure power and time and were spatially complex, confirming the need for fast, high-resolution measurements.
研究人员发现，固化过程和性能取决于曝光功率和时间，并且在空间上很复杂，这证实了快速，高分辨率测量的必要性。

Heat-sensitive materials, such as MDF wood, were a natural product market for the technology because the curing process occurs at lower temperatures.
热敏材料，如中密度纤维木板（MDF），是该技术的天然产品市场，因为固化过程是在较低的温度下进行。

However, the cure process is typically difficult and draining, and a fifty percent success rate implies a fifty percent failure rate.
然而整个治疗过程都很难，很耗费精力，而且50%的成功率也意味着50%的失败率。