Examples of using Test object in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
The test object is pure duranium.
Thermal deforamtion test Test object.
I, the test object and test requirements.
The distance between the test object and the lamp.
Automatically and effectively take away the heat from the test object.
(4) The surface of the test object should be clean and dry.
Processing method: check the output cable and check the test object.
Test object in the test All control systems are in working condition.
Testing with software modules optimized for specific test object functions.
Press"Test Object" button review the parameters of test object settings.
After disconnecting the insulation resistance meter,discharge the test object to ground.
If the test object has special functions, it should be specified in the test record.
Micro switch: safety micro switch, automatic shutdown when the test object is damaged;
Note: The test object should be tested according to the pre-established test form.
Micro switch: with safety micro switch, automatic shutdown when test object is damaged.
If the test object by the environmental electromagnetic interference is too large, resulting in instrument readings beating.
The resonant frequency depends on the capacitance of the test object and the inductance of the reactor.
The insulation damage is small, and the DC high-voltage generator has less damage to the insulation of the test object.
If the setting value is too large, even if the test object discharges or the small current breaks down.
Instructions Use the mouse to aim dummy andknock over the objects to make the test object fall over.
All functions anddesign requirements of the test object must be tested without missing items.
If want import new parameters from a relay exported"XRIO" parameters settings,press the"Edit" button entry to the Test Object converter.
Third, and then the discharge of a large capacitive test object should be 100Ω/ V discharge resistance of the test object discharge.
The test instrument is connected correctly, and the connection between the high-voltage output part and the test object should be reliable.
For the test object with the wheel jump function, all rounds of motion should be simulated, and each round has the opportunity to actually drive the switch.
Just use a multimeter to measure the outlet clamp or the test object to the core in the running panel.
The test object is often called a wind tunnel model and has sensors attached to it to measure the forces of aerodynamic pressure distribution or other characteristics.
Plastic-steel V-shaped brackets and fiber rods is placed at an angle to ensure that the test object is inclined at 15-30 degrees.
The test object, often called a wind-tunnel model, is instrumented with suitable sensors to measure aerodynamic forces, pressure distribution, or other aerodynamic-related characteristics.
Note: For the transmission test of the switch in the exit and operation of the test object, the switch must not be actually carried out.