Examples of using Initial position in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Replace the shelf to the initial position. 2.
What was the initial position you applied for at Brainlab?
Automatic return of the sample to initial position.
Automatic return to initial position after each impulse.
Then replace the filter holder in its initial position.
People also translate
Initial position: Proximity switch is not connected.
Slowly exhale and return to your initial position.
You may return to your initial position by using Spectral Recall.
Leave the tooth as close as possible to its initial position.
Return to initial position. Relax your legs and arms.
Bring one foot to the other and then back to its initial position.
Return to the initial position by pushing through your front heel.
Return the coffee distribution lever(14) back to its initial position.
In initial position you are offered some block clusters preset shape.
Typical FEN string showing the Chessboard initial position.
Definition of initial position and need for action.
Hold the pose for a few seconds and returns to the initial position.
FFA members have moved from our initial position in the spirit of good faith and cooperation.
Release the quick-release chuck- it must return to its initial position.
Corner for initial position- Choose the corner of the chart where the magnified area should be displayed.
Automatic return: automatic return to initial position when testing finished.
Once the bike is switched off, the axle will always return to its initial position.
The initial position of the Government of Mexico was not to accept discussion about their rights in that region.
The remarkable thing about the construction is that it returns to its initial position.
The US repeated its initial position that"negotiation, rather than litigation, was the most effective way to address distortions in agricultural trade.
To turn the oven off, turn the timer knob back to its initial position.
The button should automatically return to its initial position after being pressed.
If braking pressure is reduced, the compression spring(27) presses the bridge(17) with threaded pipes(16) and lever(19)back into the initial position.
When the last marking is applied on the product the unit takes the initial position and awaits the next cycle to start.
Hold that position for five seconds then slowly lower your arms to their initial position.