Examples of using When the engine in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Only operates when the engine is running.
When the engine turns over, the radio plays.
There will be a large back pressure when the engine exhaust system is blocked.
When the engine finally cranked over, she roared away.
Embedded sensors in the jet engine help predict when the engine needs maintenance.
When the engine was started in the morning, it stopped at once.
Embedded sensors in the jet engine help predict when the engine needs maintenance.
But at that moment, when the engine goes into that, it doesn't run any more.
A sound layer for the engine of the T-64has been added which is typical of when the engine is working under load.
But at that moment, when the engine goes into that, it doesn't run any more.
When the engine starts executing this code,the Call Stack will be empty.
At temperatures below 10°C, white smoke also appears when the engine is well warmed up and becomes thick white.
When the engine starts executing this code,the Call Stack will be empty.
When the engine starts executing this code, it starts by calling the function“foo.”.
On the other hand, when the engine temperature is high, the oil viscosity is small.
When the engine starts executing this code, it starts by calling the function“foo.”.
When the engine starts executing this code, it starts by calling the function“foo.”.
(2) When the engine load increases,the oil supply to the supercharger bearing must also increase.
When the engine stops, oil drains back to the sump, but Castrol MAGNATEC's intelligent molecules don't.
Only when the engine system temperature drops,the cooling system will automatically stop working, usually 3 to 5 minutes.
When the engine is working, part of the oil is supplied to the turbocharger rotor bearing for lubrication and cooling.
When the engine is first started,the new BMW M5 will be in all-wheel-drive mode(4WD) with Dynamic Stability Control(DSC) switched on.
When the engine has a high water temperature fault during operation, observe the fault phenomenon and find out the reason to eliminate it.
When the engine outputs the maximum power and reaches a balance point with the driving resistance, the car reaches its maximum speed.
When the engine is started,the heat is absorbed from the cooling water to rapidly increase the temperature of the lubricating oil.
When the engine is idling,the system keeps idle speeds smooth and consistent thanks to the reduction of exhaust gas re-circulation to a minimum.